Pedals

Foot, meet pedal. Thanks to the Stamp, you two will be closely acquainted. After scrutinizing data from the outsoles of top mountain bike shoe brands, Crank Brothers discovered that two distinct surface areas can optimize the shoe/pedal bond through the whole range of shoe sizes. The result is the Stamp, a pedal with minimum profile and maximum concavity. Specifications: - spindle material: forged scm 435 chromoly steel - body material: forged 6061-T6 - inner bearing type: igus LL-glide bearing - outer bearing type: igus LL-glide bearing - footprint: 100mm x 100mm (small) / 114mm x 111mm (large) - adjustable pins: 10 per side - minimal profile: 11mm-13mm thin - stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu) - stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu) - weight: 375g per pair (small) / 405g per pair (large)

LOOK Trail Grip pedals with Activ Grip by Vibram rewrite performance and personality rules for off-road riding. Unique, mountain peak-evolved, composite stud and rubber lug tread inserts give brilliant bike control and slip free security without trashing your shoes or your shins. Race-bred bearings and four switchable colors deliver smooth style. - Technology: Flat pedals + LOOK Activ Grip by Vibram - Body: Composite - Traction: Vulcanized Rubber Activ Grip + Composite studs - Spindle: Chromoly+ - Surface area: 107x103mm - Weight (pedal): 265g - Weight (pair): 530g

The RaceFace Ride pedal features a slim nylon-composite platform, and offers a concave and lightweight design for legitimate performance. - Molded traction pins give you all the grip you need without risk of damaging your shoes or shins - Durable Cro-Mo steel axle features a standard 9/16” pedal thread and serviceable internal parts - 9/16"

Riding in deep, sticky snow just got a whole lot easier. 45NRTH's Helva pedals feature an open CNC-forged body that excels at shedding snow. Its super thin 9mm profile gives you maximum clearance while cornering and riding in deep ruts, plus they're light. Sealed DU bearings keep them spinning smooth and replacement pin kits are available (sold separately) in seven different colors so you can color-coordinate your rig. - Size: 110mm wide x 100mm long x 9mm high - Spindle diameter: 9/16-inch - Weight: 308 grams

The OneUp Composite Pedals features a huge (115x105mm) super grippy platform with 10 rear-loading steel pins per side to keep your feet planted on even the roughest of trails. With a weight of only 355g, they won't slow you down on the climbs. Designed from stealth rubber down and shaped with a subtle convex profile to provide you with more grip thanks to the pedal sitting in the natural arch of your foot. The thin leading edge chamfered design gives you maximum clearance to reduce pedal strikes and deflect off trail obstacle. FEATURES - 10 rear loading Steel pins / side, with Nyloc nuts - DU plus cartridge bearing axle system - Thin leading edge chamfered design to deflect off obstacles - Wide platform design for increased stability - Contoured shape provides ultimate connected feel SPECS - Weight: 355g - Platform Size: 115x105mm - # of Pins: 10 per side - Axle Material: Black chromoly steel - Height: 18.5mm (13.3 at the leading edge) - Pin to Axle distance: 108mm - Color: Stealth Black, Red, Blue, Orange - Body Material: Nylon Composite

- 100% SDG DNA in the design of these pedals - Utilizes a flat profile which allows optimal grip for flat pedal shoes - Composite body design - Minimal 17mm pedal body height maximizes the pedal feel - 105mm x 110mm Platform - Ramped and undercut traction pad - 18 pins, replaceable, bottom loaded - Bearing/bushing design for maximum durability. Fully rebuildable pedal design - Cro-Mo axle

Low And Lean Made from super-strong 6061-T1 aluminum, the double concave body is sleek and light while still giving your foot a nice wide platform to stand on. Round And Round We Go Fully sealed 4-bearing design makes for smooth rolling rotations over an extremely long life. And the ability to rebuild makes it nearly unkillable. Ride Don't Slide Pins at the front and back of the pedal are angled slightly to provide improved traction and foot comfort. Because pedal bites suck. Look Good Ride Good Our top of the line pedals come in 6 different colors so that you can add as much flavor and flair to your ride as you like. Pedal Envy More than just a trusty platform for stomping landings and railing around berms, the Atlas Pedal has long been Race Face's top contender. It's strong, thin, concave, lightweight, rebuildable, and ideally suited for getting wild in the woods. Specs: - Axle Material: Chromoly Steel - Body Material: 6061 Aluminum - Material: 6061 Aluminum - Platform Height (MM):14.5 - # of Pins: 20 SHCS hex traction pins per pedal (10 per side) - Platform L x W (MM): 114 x 101 - Weight: 355g

Confident and durable The versatile Line Comp Flat Pedal is built from durable nylon for a solid platform with integrated traction, so every time you place your foot on your pedal your shoe stays put. Line Comp is strong enough to use on your mountain bike, but also at home on your city or commuter bike. A durable frame and solid axle with sealed cartridge bearings ensure lasting performance. Versatile flat pedals with a durable nylon body and forgiving traction tread that delivers consistent, confident grip. - Durable nylon body with a proven shape for comfort and confidence - Sturdy axle boosts durability and spins smoothly on sealed cartridge bearings - Nylon traction pins provide forgiving, confident traction - Simple to install with either 6mm hex or standard 15mm pedal wrench

- Power transfer and stability are maximized with a large, 725mm2 surface area. - Bottom fairing to improve aerodynamics and protect the carbon blade. - TIME's patented preopened ICLIC system allows for fast and easy cleat engagement. - Tension adjustment on the carbon blade has three positions to precisely manage the pressure of the clamping mechanism. - Hollow, stainless steel axle. Specs: - Pedal Material: Carbon - Pedal Weight: 113g - Cleat Compatibility: ICLIC - Spindle Material: Steel - Pedal Bearing: Ball bearings - Pedals Thread: 9/16"

Get connected to your daily ride with MSW's MP-100 Dual-Sided Clipless Pedals. They feature dual-sided entry so clipping in quickly is a snap, and the adjustable spring tension lets you customize exactly how much force it takes to unclip. These no-nonsense pedals are stellar in all conditions, and when the going gets sloppy, the mud-shedding design ensures you can still get in and out of your pedals quickly and easily.

- Aluminum body that is slightly more compact than the SPECIALE 12, yet it offers a stable platform and four adjustable pins for optimal grip. - The micro-adjustable tension clamping system allows riders to fine-tune the pedal function for their preferred riding style. - TIME's patented clamping system allows for easy entry and positive, predictable release, as well as a self-cleaning design to ensure reliable performance in all conditions. Specs: - Pedal Material: Aluminum - Pedal Weight: 196g - Cleat Compatibility: ATAC - Spindle Material: Steel - Pedal Bearing: Ball bearings - Pedals Thread: 9/16"

Crank Brothers' most versatile pedal. The Candy excels at it all—cyclocross, XC, trail, and all mountain. 4-sided entry enables superior mud-shedding capability, and customizable float and release angles create a dialed-in feel. Specs: - Spindle material: Forged scm 435 chromoly steel - Body material: 6061-T6 aluminum - Wing material: Stamped steel - Spring material: 300 series stainless steel - Release angle: 15° / 20° - Q-factor: 52mm - Inner bearing type: Igus LL-glide bearing - Outer bearing type: Enduro cartridge bearing - Cleat: Premium brass cleats with shims included - Weight: 355g per pair - Warranty: 5 years

Crank Brothers' Candy 3 pedals combine 4-sided cages for super-easy entry/exit with CNC'd aluminum platforms for low weight, great foot stability, and on-trail durability. The Candy 3s feature chromoly axles, stainless steel springs, CNC machined aluminum wings, and an open design that sheds mud fast, making them ideal for sloppy conditions and cyclocross. They're also enhanced with inner needle bearings and water-tight internals for consistently smooth pedaling.

Sometimes you wear mountain bike shoes; sometimes you wear sneakers. MSW's CP-200 Platform and Clipless Pedals have you covered, whatever your footwear. These versatile pedals feature a wide, stable platform on one side and an SPD-style clipless entry on the other. Adjustable spring tension on the clipless side lets you customize how much pressure it takes to unclip, while sealed bearings keep you spinning smoothly for endless miles. And, the pedals are rebuildable to further maximize their lifespan.

Dimension Combo Pedal Sets are assembled with size large toe clips, straps and reflectors. - Pedal Body Material: Plastic - Pedal Spindle: 9/16-inch - Pedal Type: Toe Clip Compatible - Spindle Material: Chromoly Steel - Weight: 475g

You've got flat shoes and shoes with cleats. Are you really gonna let your pedals tell you which ones you can wear? Crank Brothers' hybrid-style Double Shot is a flat and clipless pedal to suit your every pedaling whim. Molded pins and ribs offer superior grip, and diamond plate pads are supremely tactile. You've got entry from either side of the pedal, so that's two chances per revolution to catch. Thanks to the wide, platform-style body, though, you'll keep moving even if you don't. Specifications: - spindle material: forged scm 435 chromoly steel - body material: A380 aluminum - wing material: 17-4PH stainless - spring material: 300 series stainless steel - release angle: 15° / 20° - q-factor: 52mm - inner bearing type: igus LL-glide bearing - outer bearing type: enduro cartridge bearing - cleat: premium brass cleats with shims included - weight: 395g per pair

Rally RK200 is tested to the extreme, so you can ride there too. This dual-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding. - Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to ensure total reliability. Featuring a superior design with sensors housed inside, these sleek pedals install like any pedal. And they're quick to transfer between bikes. - Advanced Cycling Dynamics—In addition to total power and cadence, Rally RK200 measures much more. These metrics help you tailor your training around your specific weaknesses and strengths to help you improve. - Left/Right Balance—Measure power from your left leg versus power from your right leg to get a better look at how symmetrically you're producing power. - Seated vs. Standing—Track the amount of time you spend in each position and gauge position effectiveness. - Power Phase—Get a clear look at where you're producing power in the pedal stroke. - Platform Center Offset—Ensure proper cleat position by keeping track of where power is applied on the pedal. - Cleat Compatibility—For a comfortable ride, these pedals are designed with your favorite LOOK KEO cleats in mind. - Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round. A transferable spindle can be installed in Rally RS road or Rally XC off-road pedal body kits (each sold separately). - Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life. Specs: - Battery type: LR44/SR44 (x4) or CR1/3N (x2) - Battery life: up to 120 hours - Maximum rider weight: 105kg - Accuracy: +/- 1% - Field calibration - Adjustable release tension - Measurement location: spindle - Communication: ANT+ and BLUETOOTH - Weight: 326g - Water resistance: IPX7 - Cleat type: KEO - Q-factor: 53mm (55mm with provided 2mm washer) - Stack height: 12.2mm In the Box: - Rally RK200 pedals - Cleat hardware - 55mm Q-factor washers - Documentation

With a wide contact area, the PD-ME700 pedals let riders focus on the trail ahead. Designed to work seamlessly with SHIMANO AM series shoes, the SPD trail pedals deliver enhanced stability over rough terrain. Features Wide, dual-sided platform improves pedal-to-shoe stability and power transfer Integrated cage increases control when not clipped in and protects binding mechanism from impacts Robust retention claws provide smooth engagement and release Rider adjustable entry and release tension for individual customization Chrome-moly spindle and low-maintenance sealed bearing cartridge axle *Includes Cleats*

Forged alloy platform pedals with a hardened chromoly spindle. - Molded pins - Size: 9/16-inch

Fyxation Gates Pedals with Strap - Rugged and durable pedal/strap combination - Includes 2 pedals and 2 straps - 9/16"

Chase your dreams with the KEO 2 MAX CARBON pedal. The large contact area offers perfect power transfer from your legs to your bike. The carbon body provides a lightweight, efficient platform, while the Chromoly+ axle offers reliability in all conditions. Install your pedal, adjust the tension, and you're ready to ride. - Technology: Spring - Cleats: Keo Grip - Retention: 8 to 12 - Body: Carbon - Spindle: Chromoly+ - Platform material: Stainless Steel - Platform area: 500mm² - Platform width: 60mm - Q Factor: 53mm - Stack height + cleats: 17.3mm (11 + 6.3mm) - Weight (pedal): 125g - Weight (pair + cleats): 312g

- Pedal Weight: (pair) 377g - Cleat Weight: (pair) 64g - Size: 68 x 84 x 17 mm - Body Material: aluminum extruded / CNC machined - Spindle: CNC machined cr-moly - Pedal Bearings: sealed bearings / IGUS bushings - Cleat System: X1 / X1F (HT exclusive system) - Pins: replaceable SP7 (M4 x 6mm) pins

The KEO 2 MAX pedal is an excellent example of LOOK's design experience. With its wide contact area and composite body, it offers state-of-the-art technology for full power transfer, in an affordable package. - Technology: Spring - Cleats: Keo Grip - Retention: 8 to 12 - Body: Composite - Spindle: Chromoly+ - Platform material: Stainless Steel - Platform area: 500mm² - Platform width: 50mm - Q Factor: 53mm - Stack height + cleats: 17.3mm (11 + 6.3mm) - Weight (pedal): 130g - Weight (pair + cleats): 328g

Wolf Tooth Waveform Aluminum Pedals are designed for all-mountain riding, from XC to downhill. They are engineered to lock in your foot with a shape that matches your shoe, rear-loading pins for grip, and a dual-concave profile to further cradle your feet. The pedals come in two sizes, and are proportionally scaled to provide a supportive platform shaped to match the footprint of your shoe. Large is 112mm x 106mm, small is 105mm x 99mm. Dual-Concave Profile: - Waveform pedals are 14mm thick on the perimeter and just 12.5mm thick in the center. This profile cradles your foot, front to back and side to side. Extra Grip: - Each side of the pedal has 11 stainless steel rear-loading pins for loads of traction. An additional six pins ship with each set of pedals and they are available as replacement parts. Shaped with Purpose: - The shape of Waveform Aluminum Pedals matches the footprint of your shoe Reliable Performance: - Three low-friction, fully sealed cartridge bearings and one igus bushing with a custom radial seal protect internal components against trail debris for riding in all conditions. Tapered Edges: - Large, tapered leading edge to deflect pedal strikes on rocky, rooty terrain Two sizes: - Large: 112mm x 106mm - 384g - Small: 105mm x 99mm - 373g Each size is proportionally scaled to match the silhouette of your shoe based on foot size or pedal size preference.

VP's Vice pedals are nice, flat pedals that perform and look great. They have large platforms and are low-profile reducing impacts with rocks and roots if you use them off-road (they're perfect for BMX and other bikes, too). They have 12 pins per side so they grip no matter what, and they feature extruded/CNC-machined aluminum bodies with heat-treated chromoly axles and sealed bearings for durability. - 406 grams - 9/16" axles

VP's Flat Pedals combine wide platforms and a great grip for excellent stability with extruded and CNC-machined aluminum bodies for light weight and a rainbow of colors for high style. You also get tough chromoly axles and sealed bearings for durability. - 345 grams - 9/16" axles

The ultimate pedal for enduro riding and racing, with a longer spindle. - Concave platform for secure foothold - 6 adjustable pins per side for grip - Integrated traction pad technology to optimize the shoe/pedal interface - Ribbed body for better traction when unclipped - Chamfered edges to reduce rock-strikes - 57mm q-factor for increased shoe clearance and control - 4-sided entry / superior mud shedding - Customizable float & release angle - Premium bearings & double seal system - Adjustable Pins: 6 per side - Body Material: 6061-T6 aluminum - Cleats: Premium brass cleats with shims included - Endcap: Hex alloy - Inner Bearing Type: Igus LL-glide bearing - Max Rider Weight: No restriction - Outer Bearing Type: Enduro cartridge bearing - Q-factor: 57mm - Release Angle: 15° / 20° - Spindle Material: Forged scm 435 chromoly steel - Spring Material: 300 series stainless steel - Warranty: 5 years - Weight: 424g per pair - Wing Material: 17-4PH stainless

For enduro riding and racing, it's all about the Crank Brothers Mallet E pedals. Winner of a Design & Innovation Award for 2016, this pedal features a concave platform for a secure, grippy foothold, and six adjustable pins per side for even more security. The adjustable traction pad interface keeps you in contact with the pedal so you can focus on your line. Four-sided entry ensures your foot will catch quickly and easily, as well as helping the Mallet E shed mud like no other. A 52mm q-factor is your best friend on tight trails, because who wants to be clotheslined by a tree? Not you, that's for sure. Throw in chamfered edges to ward off rock strikes, and a customizable float and release system and you're ready to shred. Specifications: - spindle material: forged scm 435 chromoly steel - body material: 6061-T6 aluminum - wing material: 17-4PH stainless - spring material: 300 series stainless steel - release angle: 15° / 20° - q-factor: 52mm - inner bearing type: igus LL-glide bearing - outer bearing type: enduro cartridge bearing - adjustable pins: 6 per side for grip - endcap: hex alloy - cleat: premium brass cleats with shims included - weight: 419g per pair

The Twisted Pro pedal features a larger body shape, slimmer height and more concave. - Loose-ball bearing

The GEO TREKKING VISION is the ultimate commuter pedal. Two different sides: one flat suitable for any shoes, and the other SPD-compatible for when you take things up a level. A removable light system adds that little extra security: ride to work in your suit and tie, ride home via the trails and side roads. - Technology: Hybrid pedals = half flat + half clipless - Cleats: X-Track Easy - Cleats Standard: SPD compatible - Release Angle: 13° - Retention: 5-10 - Body: Composite - Traction: Composite studs - Spindle: Chromoly+ - Platform width: 84mm - Weight (pedal): 217g - Weight (pair + cleats): 490g - Light included: Yes (x2) - Light modes: 3 (steady/flash/flash eco) - Battery Life: Up to 30h (flash eco) - Light Output: 15 lumens - Battery: Micro USB rechargeable (cable included) - Charging time: 50 min - Beam angle: 180°

Rally XC200 is tested to the extreme, so you can ride there too. This dual-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding. - Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to increase reliability. Featuring a superior design with sensors housed inside, these sleek pedals install like any pedal. And they're quick to transfer between bikes. - Advanced Cycling Dynamics—In addition to total power and cadence, Rally XC200 measures much more. These metrics help you identify your strengths and weaknesses, so you can work to improve. - Left/Right Balance—Measure power from your left leg versus power from your right leg to get a better look at how symmetrically you're producing power. - Seated vs. Standing—Track the amount of time you spend in each position and gauge position effectiveness. - Power Phase—Get a clear look at where you're producing power in the pedal stroke. - Platform Center Offset—Ensure proper cleat position by keeping track of where power is applied on the pedal. - Cleat Compatibility—For a comfortable ride, these pedals are designed to fit your favorite Shimano SPD cleats. - Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round with a transferable spindle that can be installed in the Rally RS/Rally RK road pedal body kits (each sold separately). - Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life. Specs: - Battery type: LR44/SR44 (x4) - Battery life: up to 120 hours (with LR44 battery type) - Weight: 316g - Water resistance: IPX7 - Max. rider weight: 105kg - Accuracy: +/- 1.0% - Cleat type: Shimano SPD - Q-factor: 53/55mm with supplied spacing washer - Stack height: 13.5mm - Field calibration - Adjustable release tension - Garmin Connect - Measurement location: Spindle - Communication: ANT+ and Bluetooth In the Box: - Rally XC200 pedals - Cleat hardware - 55mm Q-factor washers - Documentation

The Best Of Both Metals The Aeffect pairs a thin, lightweight 6061-TI aluminum body with a cro-mo axel that runs our tried and true bearing and bushing set-up. Surefooted As A Mule You want traction? You got it. Bottom loading hex-head threaded pins give you all the bite and foot security you need. Your True Colors Shining Through Pick from three vibrant colors to compliment your build and your personal sense of style. Just don't choose wrong or they'll make fun of you. Get Up Stand Up Like a good trail dog, the Aeffect Pedal is most in its element on a flowy section of backwoods Nirvana. Designed with a smaller body, this strong, durable, rebuildable pedal is made to chase stoke all day long. Specs: - Axle Material: Chromoly Steel - Body Material: 6061 Aluminum - Material: 6061 Aluminum - Platform Height (MM):16.9 - # of Pins: 20 SHCS hex traction pins per pedal (10 per side) - Platform L x W (MM): 101 x 100 - Weight: 375g

The Comp version of Ritchey's world-beating Paradigm pedal has been redesigned from the ground, up. New engagement system provides best-in-class entry and release and excellent mud-shedding characteristics. The revamped axle system offers even greater bearing life, and a wider body improves stability. - Body: cast alloy - Axle material: CroMo - Inner bearing: ball bearing - Outer bearing: ball bearing - Float: 4° - Distance crank-to-center: 52.5mm - Pedal stack height: 17.1mm - Sold as a pair - Cleats included - Weight: 331g

A modern take on the classic platform pedal style. DMR provides a large pedal body area and DU bushing system aimed to provide riders with control, durability and serviceability. - 15 x 95 x 25mm (L x W x H) - 8 replaceable M4x0.7x8 corner pins and 12 fitted non-replaceable pins per pedal - Designed with grease ports; 'V-lube' grease syringe included with pedals - Double concave pedal body for control and stability - Classic parallelogram shape - 9/16"

An excellent choice for year round riding. Fyxation's robust impact-grade nylon body, sealed-bearing construction, and grippy metal pinned platform with full stainless steel pins. For the fat-biker or winter commuter, the durable stainless pins add an extra layer of rust protection for the harshest riding conditions. - High-impact nylon body built to take abuse - Smooth-running sealed bearing and DU bushing - Electroplated chromoly spindle - Electroplated stainless steel replaceable pins for added grip with shoes or boots - Nylon body doesn't suck heat out of your feet like alloy pedals do - Height: 14mm - Width: 105mm - 9/16"

Lots of foot-huggin' lovin and a natural connection to your bike...that's what you get from VP’s all new, dual-concave platform design. VP-Aim was developed with input from both top free riders and local soul riders to deliver the right feeling of control and security at the right price. It’s still thin, it’s still stylish, and it can take all the beating that you can give it and keep rolling on. - 105 x105 x18mm platform - 9/16"

- All aluminum cage and body pedal with pre-assembled strap system - Alternative to clipless pedals with easy in and out strap

Dimension Mountain Compe Pedals. - Forged aluminum body - Accepts toe clips - Pedal Body Material: Aluminum - Pedal Spindle: 9/16-inch - Pedal Type: Toe Clip Compatible - Spindle Material: Chromoly Steel - Weight: 335g

A nylon evolution of DMR's V12 body design. Equipped with the same concave footprint and narrow profile DMR pedals are known for, while spinning on a Dual DU bushing system to provide the value of a plastic pedal with a thoughtful approach to increased durability. - Chromoly axle - Dual DU bushing system - Full-length 6mm off-road pins for added grip

Alloy pedals with a smaller platform that is ideal for smaller sized shoes and offers ample ground and cornering clearance. - 6061-T6 die-cast alloy body construction - 2DU Bushing System with low-friction coating - Boron axles - 14 removable traction pins per pedal - Pedal body dimensions: 105 x 93 x 25mm (LxWxH) - 9/16"

The TRAIL FUSION pedals give you superior control of your mountain bike and far greater performance than traditional flat pedals. Their wide composite platform offers increased stability, better power transmission and ultimate comfort, allowing you to pedal with confidence and get the most out of your ride. And worry no longer when the trail gets technical: each pedal face features eight replaceable pins for maximum grip. Customize your look with one of the 5 available colors and forget your limits out on the trail!

What if you could take control of gravity? Lean into the bend as far as possible without losing contact with the trail, or fly over doubles with ease? Designed alongside our top athletes to push the limits of grip and control, our TRAIL ROC PLUS flat pedals feature a wide, concave forged aluminum platform and high-resistance axles for perfect stability and unparalleled toughness. With 10 adjustable aluminum pins and a 16mm profile height, they keep you glued to your bike through curves, jumps and technical sections. Make every run a new challenge!

Size specific magnesium platform pedal provides optimal shoe/pedal interface. Details - Magnesium pedal body for weight reduction - Optimal surface area - Minimal body profile - 16mm thin - Concave pin profile & 10 adjustable pins per side for grip - Premium bearings & seal system - Stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu) - Stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu) - Serviceable, pedal refresh kit found here Specs - Adjustable pins: 10 per side - Body material: AM60B Magnesium Alloy - Endcap: T15 - Footprint: 114mm x 111mm - Inner bearing type: Igus Bearing - Max rider weight: No restriction - Outer bearing type: Double Cartridge Bearing - Shoe size: US 10-15 // EU 43-49 - Spindle material: Forged SCM 415 Chromoly Steel - Warranty: 5 years - Weight: 386g per pair

Flat or clipless pedals? The question may arise, but not anymore thanks to the GEO TREKKING commuter range of pedals. This robust aluminum pedal is flat on one side and SPD-compatible on the other, with the added security of the VISION light system for when the ride turns dark. - Technology: Hybrid pedals = half flat + half clipless - Cleats: X-Track Easy - Cleats Standard: SPD compatible - Release angle: 13° - Retention: 5-10 - Body: Aluminum - Traction: 8 traction pins - Spindle: Chromoly+ - Platform width: 83mm - Weight (pedal): 247g - Weight (pair + cleats): 550g - Light included: Yes (x2) - Light modes: 3 (steady/flash/flash eco) - Battery Life: Up to 30h (flash eco) - Light Output: 15 lumens - Battery: Micro USB rechargeable (cable included) - Charging time: 50 min - Beam angle: 180°

- Developed for the demands of professional Enduro racing, the SPECIALE 12 is made of a 6106-T6 aluminum - A wide platform, adjustable pins for optimal grip, and a micro-adjustable clamping system combine to exceed the demands of the most advanced riders. - TIME's renowned engagement system allows easy engagement with a positive, predictable entry and release, as well as a design that self-cleans even in the most difficult conditions.

Dimension Mountain Sport Pedals. - Molded nylon pedal body - Accepts toe clips - Pedal Body Material: Plastic - Pedal Spindle: 9/16-inch - Pedal Type: Toe Clip Compatible - Spindle Material: Chromoly - Weight: 290g

Xpedo's designers went back to the drawing board for the GFX to create a fresh new design to meet the demands of the evolving downhill racing styles. The latitude entry system allows rapid engagement in any condition, positioning the front claw upwards for intuitive, seamless contact with the pedal. The Posi-Fit retention system is fully adjustable for fine-tuning the entry and release. The low-profile 6061 CNC body with adjustable height pins provide traction and support with any style of shoes. Tapered cromoly spindles roll on three precision cartridge bearings for easy maintenance. Wider Q-factor allows ample clearance between shoe and crankarm. - Weight: 468g CrMo - Body: 60661 CNC AL - Spindle: Cromoly - Bearings: 3 Cartridge - Springs: SWP - Pins: 16 adjustable height grub pins per pair - Cleat: XPEDO XPT (6° Float)

Discover the world of clipless pedals with the KEO CLASSIC 3. The easily adjustable tension makes clipping in and out smooth and simple, with the ability to increase tension to fully appreciate the pedal and all its advantages. - Technology: Spring - Cleats: Keo Grip - Retention: 8 to 12 - Body: Composite - Spindle: Chromoly - Platform Material: Composite - Platform area: 400mm² - Platform width: 50mm - Q Factor: 53mm - Stack height + cleats: 17.8mm (11.5 + 6.3mm) - Weight (pedal): 140g - Weight (pair + cleats): 350g

The Thermalite pedals feature a concave, low profile design and are molded with Thermalite nylon material. - Micro knurling with 24 pins for traction - Recessed end to prevent damage to bearing cover - Chromoly spindle with 6mm broach and 15mm wrench flats - Weight: 391g - Pedal Body Material: Composite/Plastic

The MSW Judo Clipless Road Pedal achieves efficient power transfer through the stiffness of the carbon composite body to make your road ride less work and more fun. Yep. - 52.5 mm chromoly spindle spins on a bushing & two cartridge bearings - SPD-SL™ compatible - 6° float cleats included - Black - Made in Hong Kong

The desert Southwest is filled with amazing vistas, stunning scenery, and some of the best mountain biking that can be found anywhere in the world. The Mesa MP Desert Series was inspired by the amazing colors that can be found in the desert and pays tribute to the biking meccas of Moab, Fruita, and Sedona. These nylon replaceable pin-sealed bearing thin-bodied pedals are ideal for riding anywhere in the Colorado Plateau and beyond. The earth-tone colors stand out in a crowded pedal market where bright/flashy colors rule and they are a great addition to any bike where subtle hues are the goal. - Super thin-profile platform pedal designed for trail and urban riders - Impact-grade nylon construction with 16 replaceable metal-pin traction pins (8 per side) - CrMo spindle axle with a smooth running sealed inner DU bushing / dual-outer sealed bear

Built to handle the rigors of riding off-road, the MSW Thump composite pedals with replaceable steel pins provide solid traction when the trail gets hairy. The concave shape combined with tall pins provide the perfect balance of comfort and traction for a range of applications meant to expand your horizon. - Tough nylon composite body with adjustable, replaceable steel pins - Platform Size = 118 x 99 x 19 mm - Chromoly steel, 9/16” spindle, sealed cartridge bearings and nylon bushings - Pin height: 3 mm out of the box. Remove the 2 mm washer under the pin head to convert to 5 mm pin height. - Body: 18.5 mm thick with 2.5 mm of concavity for great control and comfort - Composite pedal body - Black - Made in Taiwan

PA12A pedals feature a reinforced nylon composite body with replaceable grip pins and CNC machined chromoly spindle. - 2 x sealed bearings and DU bushings - Replaceable grip pins - Dimensions: 100 x 95 x 18 mm

The Mallet 2 pedal from Crank Brothers is ready to drop the hammer. No, seriously, this thing has been redesigned and rebuilt from the ground up, and it's a whole new creature. Durability and a lightweight aluminum body take the center stage in this versatile pedal that's equally at home shredding singletrack and providing a platform for your sneakers while you ride to class. The Mallet 2 offers a flat pedal feel and clipped-in control simultaneously for the best of both worlds and performance you can feel. And, with a customizable float and release angle, your body will thank you with miles and miles of fun.

This set of pedals aims to provide a large platform, thin profile, durability, tune-ability and serviceability. Ideal for anything from all-mountain, to downhill, to snow. - 105x115mm pedal body - 17mm concave foot bed - Extruded 6061 aluminum body and 4140 chromoly steel axles - High-load DU bushing and cartridge bearing - 11 pins per side and 7 of which can be flipped to fit short- or long-way to fine tune the amount of grip desired - 9/16"

The exceptional comfort and versatility of the Speedplay Comp road pedal derive from its confidence-inspiring and stable platform, offering both value and performance mile after mile for cyclists of all levels. Precise engagement, effortless release, and dual-sided entry with the Easy Tension Cleat deliver ease of use and confidence to the rider. Speedplay is the only pedal system to provide independent fore-aft, left-right, and float adjustability to optimize fit and enhance performance through better biomechanics. Versatile performance defines the advanced Speedplay system. Utilizing this innovative platform, Comp's confident engagement and stable platform provide benefits to riders at every level. - Weight: 224g (per pedal pair) - Spindle Material: Chromoly - Spindle Length: 53mm - Float: 5 to 15º Micro-Adjustable - Cornering Angle: 37º - Bearing: Sealed

MTB flat pedals with a durable nylon design and replaceable pins for consistent grip. Confident and durable Most downhillers, dirt jumpers, and enduro riders prefer flat pedals, but any trail rider can appreciate the benefits of the Line Elite MTB pedal. It features a durable nylon body and solid platform with replaceable traction pins, so every time you place your foot your shoe stays put. It also has a durable axle and sealed cartridge bearings to ensure lasting performance. - Durable nylon body with a proven shape for comfort and confidence - Durable axle spins on sealed cartridge bearings - Replaceable steel traction pins - Install with either 6mm hex or standard 15mm pedal wrench - Spindle diameter: 9/16-inch

PD-EH500 pedals FEATURE - One side SPD, the other side flat - Light action binding makes frequent stepping-in & out easier - Better grip on flat side for wet condition BENEFIT - Convenient road touring pedal - Optimized for urban riding - Multi-condition - Best match with CT or MT shoes

Here For The Party A party's just not a party until Chester shows up. This burly nylon-composite pedal is big on features, small on price, and fully ready to tear up some trail. A concave body, replaceable traction pins, and a cro-mo sealed axle are all representing. The Full Meal Deal A slim yet durable nylon-composite body is accented with a concave design, built-in traction treads and 8 replaceable traction pins per side. Not Just Another Axle Made to stand up to punishment, the durable sealed cro-mo axle rolls on a completely serviceable bearing + bushing set-up. Bling For Your Bike No build is complete without sick looking color-Coordinated pedals. Chester pedals come in multiple vibrant colors to choose from. Specs - Platform Height: 18.4mm - # of Pins: 16 SHCS hex traction pins per pedal (8 per side) - Platform L x W: 101 x 110mm - Axle Material: Chromoly Steel - Body Material: Nylon Composite - Material: Nylon Composite - Weight: 360g

The OneUp Aluminum Pedals features a huge (115x105mm) super grippy platform with 10 rear-loading hexagonal steel pins per side to keep your feet planted on even the roughest of trails. With a weight of only 365g, the OneUp Aluminum Pedals won't slow you down on the climbs. Designed from stealth rubber down and shaped with a subtle convex profile to provide you with more grip thanks to the pedals sitting in the natural arch of your foot. The ultra-thin design (only 8mm at the leading edge) gives you maximum clearance to reduce pedal strikes and deflect off trail obstacle. Clip Less, Ride More. When it s finally time to service your bearings, the unique cassette tool lock ring system makes re-greasing the bearings exceptionally fast and easy. FEATURES - 10 rear loading custom hexagonal removable pins per side for maximum grip - Ultra thin leading edge chamfered design to deflect off any obstacle - Fully sealed and serviceable design with built in bearing extractor - Wide platform design for increased stability - Contoured shape provides ultimate connected feel SPECS - Weight: 365g - Platform Size: 115x105mm - # of Pins: 10 per side - Axle Material: Chromoly steel - Height: 8.3-12mm - Pin to Axle distance: 112mm - Color: Black, Green, Grey, Blue, Orange, Red, Purple, OilSlick - Body Material: 6061-T6 Aluminum COMPATIBILITY - Currently, due to the deep counterbore of the crank arms, these pedals are not compatible with SRAM Carbon cranks. - These pedals are not compatible with crank boots without modification to the crank boots. We recommend removing crankboots before installation.