Cables

- Vision Aero/reverse brake lever specific brake cable - Replacement cables that only work with Vision reverse brake levers - Sold individually

Shimano Dura-Ace BC-9000 Polymer Road Brake Cable & Housing sets reduce the sliding resistance to achieve lighter and quicker operation. - Dura-Ace grade SLR-EV Road brake cable set - Stainless steel for anti-rust protection - Low friction polymer material on the cable may cause slippage at the cable fixing bolt after initial pre-stretch for the cable is performed. Fur-like material from polymer coating will not affect the performance - Pre-lubed with special polymer compatible grease

These PTFE-coated, stainless steel cable and housing sets reduce the sliding resistance to achieve lighter and quicker operation. Includes: - 1400mm x 5mm housing x 1 - 800mm x 5mm housing x 1 - 2050mm x 1.6mm cable x 1 - 1000mm x 1.6mm cable x 1

- Wet or muddy condition cable sealing solution - 4/6mm

Shimano XTR OT-SP41 Polymer Coated Derailleur Cable Sets

SRAM's Guide Hydraulic Line Kit is a replacement hose kit for all Guide brakes.

Origin-8's Pro Cable Guide Pulley fulfills all your special cable routing needs. Designed to clamp onto seat tube, it allows you to route your cable for bottom pull front derailleurs. Uses a sealed bearing pulley.

Jagwire's Brake Noodles feature stainless-steel tubes with aluminum ends for durability and excellent performance. You get 10 of them for all your bicycle setup needs.

Jagwire's Cable Grips are adapters that make it possible to run hydraulic brake lines on bicycle frames that have housing stops that were designed for regular wire cables and standard housing sections. Once the regular cables and housing sections are removed, the Cable Grips are inserted and tightened in place in the standard frame stops. Then, the hydraulic lines are attached and securely held in place by the gripping jaw(s) of the Cable Grips. - Aluminum model accepts lines up to 5mm in diameter and the lines snap in. - Stainless model grips fully around the lines and is adjustable to fit most diameters.

The Elite Sealed Shift Kit uses a continuous liner that seals the system completely protecting it against dirt, mud and other contamination. Available in three colors, this system offers the ultimate combination of protection and low-friction performance. To ensure the best possible performance, we've paired Elite Polished Ultra-Slick inner cables with our improved Slick-Lube continuously-lubricated liners. This combination delivers precise cable movement and excellent durability. - The continuous liner running from the levers to the derailleur offers outstanding protection from dirt and debris - Elite Polished Ultra-Slick cables are paired with Slick-Lube liners to minimize friction - Lightweight XEX shift housing is nearly 30% lighter than traditional shift housing - 5.0mm shift housing and 1.9mm inner liner may not be compatible with all frames and components What's Included: - 1x 3200mm XEX Shift Housing - 2x 2300mm STS-EL Elite Polished Ultra-Slick Shift Inner Cables - 2x 2225mm Slick-Lube Liners - 2x LEX-SL 4mm Shift Housing Segments, 300mm - 4x Open Brass End Caps - 7x Open Alloy End Caps for 5mm Housing - 2x Open Alloy End Caps for 4mm Housing - 2x Pro Indexed Inline Adjusters (4mm/5mm) - 2x Housing Connectors (4mm/5mm) - 2x Cable Tips - 2x Grub Seals - 2x 5G Tube Tops - 2x Rotating Hooks

Jagwire's M10 Adjusting Barrel is a 10 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right replacement part for most mountain bike brake levers. It's made of durable metal with a lockring for locking your adjustments. You get a pack of 10.

Jagwire's M7 Adjusting Barrel is a 7 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right part for many older-style mountain bike brake levers. It comes in two models and is made of durable metal with a lockring for locking your adjustments. You get a pack of 10.

Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables. - Slick cables are die-extruded for smooth operation - Pre-stretched - Double-ended SRAM/Shimano mountain and road compatible cable ends - Stainless steel construction resists corrosion - Double Ended: Yes - Cable Head: Shimano/SRAM Road, Shimano/SRAM Mountain - Defined Color: Silver - Quantity Included: 1

Jagwire's Road Brake Inner Wire is a high-quality brake cable made of stainless steel for excellent braking performance, corrosion resistance and durability. It comes in Campagnolo and SRAM/Shimano models and lengths to fit single and tandem bicycles.

Jagwire's Sport Slick Stainless Shift Cable is a high-quality shift cable made of stainless steel for excellent shifting performance, corrosion resistance and durability. It also comes in lengths to fit single and tandem bicycles.

Frame mounted barrel adjusters allow cable tension to be easily fine tuned. - Adjuster threading is M5 standard: 5mm OD, 0.8mm thread pitch - Bag of 10

Jagwire's V-Brake Boot covers and seals the points where the the cable on your V-Brakes, linear-pull and direct-pull brakes enter the noodle. It's made of flexible rubber to seal the cable and help keep dirt, grit and moisture from entering. It keeps your cables and brakes working nice and smooth and ensures your cables last as long as possible. You get a bag of 10.

- Aluminum straddle cable carrier for cantilever brake

- Shimano brand casing with internal lining for optimized response - Brake: offered in a stiffer (M-System) for MTB, or a more pliable (SLR) version for road applications (can be used for either discipline depending on user preference) - Derailleur: (SIS-SP41) compressionless design pre-lubricated with silicon grease to decrease cable friction

Shimano Stainless Derailleur Cables Cable Head: Shimano/SRAM Cable Type: Stainless Defined Color: Gray Diameter: 1.2mm Double Ended: No Length: 3000 mm Quantity Included: 1

Shimano Stainless Road/MTB Brake Cable & Housing Sets - 1 x 2000mm black 5mm housing - 1 x 1000mm and 1 x 2050mm 1.6mm stainless cables - 2 end caps and 2 cable crimps

- 1.2 mm x 2100 mm (1 pc.) - 1.2 mm x 1800 mm (1 pc.) - OPTISLICK - Stainless steel - Outer cap with short tongue for ST (2 pcs.) - SIS-SP40 outer caps (3 pcs.) - SIS-SP40 sealed outer caps (1 pc.) - Inner end caps (2 pcs.) - OT-SP41 1700 mm - OT-RS900 (1 pc.)

- Brake casing has internal lining and external plastic coating - Derailleur casing is compressionless with internal lining and external plastic coating

- Brake casing has internal lining and external plastic coating - Length: 30m

- Aluminum cable-end crimps for derailleur or brake applications to prevent fraying after the final cut

SRAM's Cable Housing/Hydraulic Line Rotating Hooks secure your cable housings to hold them the way you want them, keep them from hitting each other, and making rattling noises, and they provide a tidy custom look, too.

SRAM's Inline Barrel Adjusters are placed on your shift cables near the handlebars so that you can turn the adjusters to fine-tune your shifting. They feature durable and light aluminum/composite construction with rubber covers for easy operation.

SRAM's Inline Barrel Adjusters are placed on your brake cables near the handlebars so that you can turn the adjusters to fine-tune your braking. They feature durable and light aluminum/composite construction with rubber covers for easy operation.

SRAM's Line/Housing Frame Protectors are rubber covers that simply press onto your cable housings and or hydraulic lines to prevent the housings from hitting the frame and rattling or damaging the finish. There are 4 protectors in each package.

Replacement line kit for SRAM and Avid hydraulic disc brakes. - For Level Ultimate/Level TLM (A1), 2018+ CODE R/RSC (B1) - 2000mm, black