Shoes

XC COMPETITION-LEVEL SHOES INFUSED WITH S-PHYRE DNA. FEATURES - Lightweight SHIMANO ULTREAD XC rubber outsole delivers competition-grade grip that lasts. - Surround wrapping upper structure reduces overlap and provides a glove-like fit. Rider-tunable spikes allow riders to select and swap spikes to match riding styles and conditions. - Ultra-rigid, lightweight carbon fiber reinforced midsole. - Supple high-density synthetic leather with perforation and lightweight mesh/TPU combination bring superior fit and comfort. - Dual independent BOA® L6 dials allow quick, micro tension adjustments. - Adjustable powerzone lace guide securely holds forefoot. - Low stack height midsole helps stabilize foot, maximizes power transfer and efficiency.

From recent road converts, to sultans of gravel speed, the new S-Works Recon delivers pavement-bred performance to the gravel discipline. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is an intentional fit, that's stiff, comfortable, and tunable—to put the power down. Inside and out, Body Geometry technology is baked into the S-Works Recon. Driven by nearly two decades of development and validated by data, we ensure there is no pain points, only performance, where your body meets the bike. Through our creation of the Varus Wedge, Longitudinal Arch, and Metatarsal Button, your feet stay in their most optimal position when pedaling—as well as in line with your knee and hips. - High-density pontoons and new shims allow riders to tune their pedal interface for maximum efficiency and a road-like pedal platform - Features Body Geometry technology by way of the Varus Wedge, a Longitudinal Arch, and Metatarsal Button - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Using an Internal I-Beam adds stiffness and strength—eliminating the need for additional bracing and allowing the shoe to stay extremely lightweight - Zoned reinforcement across quarter and forefoot maximizes support while the updated BOA® routing improves lockdown—eliminating the need for a toe strap - Additional 3mm, 6mm, and 9mm pontoon shims for leg length discrepancy and cleat stacker available through Specialized Rider Care. - For a wider fit — the new base plate is 4mm wider than the standard width (8mm wider than S-Works Recon Mountain Bike Shoes). - 280g for a size 156

With the Recon 1.0 our goal was simple - put S-Works Recon-inspired performance in a very accessible package. Easier said than done, but we've created a shoe with Body Geometry comfort and efficiency in a durable, dirt-focused shoe. So yeah, mission accomplished. Using our exclusive STRIDE toe-flex technology, the nylon outsole uses a TPU-injected forefoot for natural movement off-bike, while still providing a stiffness index of 6.0 for in-the-saddle performance. The Recon 1.0 is a double threat - efficiency at the pedals with comfort and confidence off bike. To create traction off the bike in wet or dry, gravel or dirt, we've covered the nylon outsole with our SlipNot compound. We've also lifted the heel for an even more natural feeling while walking. Three Velcro closures make slipping into the Recon 1.0 easy, and creates a fit designed for all day comfort and performance, whether your ride calls for open gravel, twisting single track, and more than your fair share of hike-a-bike. - Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Injection STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling (stiffness index 6.0) - SlipNot rubber tread for confident traction on all terrain. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 331g (1/2 pair, Size 42)

High-performance road cycling shoe with advanced fit and pedaling technologies. FEATURES - Integrated seamless midsole and upper construction set a new level of fit, stability and lightweight performance. - Off-set center flap mounted BOA L6 dial creates a sleeker profile with quick adjustments. - Surround wrapping upper structure reduces overlap and provides a glove-like fit. - Low stack height midsole stabilizes foot and maximizes power transfer efficiency. - Perforated synthetic leather composite upper enables superior fit and breathability. - Lightweight glass fiber reinforced nylon sole for power transfer.

Our best-selling shoe cover, this piece slips easily over road shoes to add warmth and wind protection for cool weather riding. Our AmFIB toe cover is the perfect answer to cool weather. Its softshell fabric offers terrific protection from wind and rain and is as easy to pull on as a sock. We have increased the stretch to accommodate wider shoes and sizes on the bubble. The opening is sized for any three-bolt cleat. - AmFIB Softshell provides superior wind and water protection. - Simple pull-on design. - BioViz reflective elements for low-light visibility. - For road shoes with external cleats.

The Torch 2.0 Road shoes are all about comfort—well, comfort and performance that is. Due to the materials, road shoes often feel stiff and uncomfortable. We decided to address this annoyance head on, though. To do so, we've implemented a 100% mesh and TPU construction on the Torch 2.0 that allows for more wiggle room in the toe box and a less constrictive, sock-like feel. The upper is then paired with our medium-stiffness FACT carbon sole and a rubber heel and toe that provide the perfect degree of off-the-bike traction. For the closure, we added a single lightweight Boa® IP1 dial that features tool-free snap replacement capability, while also providing simple, on-the-fly micro-adjustments. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - Carbon sole with a 7.0 Stiffness Index is engineered to be moderately stiff, yet light with a rubber heel and toe for off-the-bike traction. - Lightweight Boa® IP1 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - Mesh and TPU upper for a supple fit. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 235g (1/2 pair, Size 42)

Climb to new heights, roam farther, and ride harder in the Foray Mountain Shoe. This undeniably comfortable off-road cycling shoe features a BOA L6 dial for a superior fit on rides of any length and intensity. No matter where or how you ride, this shoe delivers thanks to a stiff sole with a durable upper featuring the added protection of GnarGuard. - inForm Race last offers a slightly roomier, high-performance fit - A single BOA L6 dial for precision fit and easy micro-adjustments - Strong, synthetic perforated upper materials hold up to off-road rider demands - Durable GnarGuard rubberized coating protects against abrasions and other damage from trail debris - Nylon composite Bronze Series sole provides stiff yet walkable performance - Stiffness index: 6 of 14 - Tachyon rubber outsole allows great grip on any surface - Compatible with 2-bolt SPD-style cleats

ROAD COMPETITION LEVEL SHOES INFUSED WITH S-PHYRE DNA. FEATURES - Integrated seamless midsole and upper construction set a new level of fit, stability and lightweight performance. - Surround wrapping upper structure reduces overlap and provides a glove-like fit. - Ultra-rigid hollow carbon midsole efficiently vents air and drains water. - Supple high-density synthetic leather with perforation and lightweight mesh/TPU combination bring superior fit and comfort. - Dual independent BOA® L6 dials allow quick, micro tension adjustments. - Adjustable powerzone lace guide securely holds forefoot. - SHIMANO DYNALAST promotes smoother pedaling and more efficient power transfer.

ROAD COMPETITION LEVEL SHOES INFUSED WITH S-PHYRE DNA. FEATURES - Integrated seamless midsole and upper construction set a new level of fit, stability and lightweight performance. - Surround wrapping upper structure reduces overlap and provides a glove-like fit. - Ultra-rigid hollow carbon midsole efficiently vents air and drains water. - Supple high-density synthetic leather with perforation and lightweight mesh/TPU combination bring superior fit and comfort. - Dual independent BOA® L6 dials allow quick, micro tension adjustments. - Adjustable powerzone lace guide securely holds forefoot. - SHIMANO DYNALAST promotes smoother pedaling and more efficient power transfer.

Versatility, thy name is SSR shoe! On-road, off-road, touring across the country, or commuting to the farmers' market—Bontrager's SSR Multisport cycling shoe will tackle it all. Its roomier fit and classic lace closure system deliver comfort and convenience, and the lugged, full-rubber outsole gives you all the traction you need for off-bike scrambles and adventures. - inForm Performance last offers our roomiest, most relaxed fit for comfort on and off the bike - Glass-reinforced nylon plate with textured rubber outsole for great grip - Classic lace closure system with convenient elastic lace keeper - Compatible with 2-bolt, SPD-style cleats - Plugs available for better flat pedal use when installed into cleat box using PN 563869 - Cleat compatibility: SPD 2-bolt - Closure type: Laces - Sole fiber content: 100% Rubber - Upper fiber content: 60.9% Polyester / 37.1% PU / 2% TPU - Liner fiber content: 100% Polyester

Ragnarök BOA® boots are perfect for the hard-to-predict weather of late fall and early spring. Built to block cold and moisture, these lightweight cycling boots feature a 25ºF+ (-4ºC+) comfort range to keep feet warm and dry through the chill of late autumn and early spring rides. - Free cleat plates for flat-pedal use are available upon request. Please contact brand support at info@45nrth.com - Rated for 25ºF+ (-4ºC+) comfort - Waterproof breathable membrane to manage moisture - Neoprene ankle cuff to keep out moisture and road grit - The BOA® Fit System delivers micro-adjustable, precision fit engineered to perform in the toughest conditions - Real-rubber outsole with added grip for slippery surfaces - 2-bolt cleat mount ANTI-SLIP MICROGLASS RUBBER A rubber compound electrostatically aligned with microscopic glass fibers to create abrasive protruding shards, increasing friction on slippery surfaces such as ice, wet wood, wet linoleum, and wet metal found on many stairs and floors. WATERPROOF-BREATHABLE MEMBRANE An ultra-thin sheet of microporous material behind our textile shells keeps you dry and warm in the harshest weather conditions. Our waterproof, breathable membranes stop liquid from the outside, but release vapor from the inside for thermal and moisture regulation. BOA CLOSURE Micro-adjustable BOA closure for perfectly dialed fit. LOW CUT NEOPRENE ANKLE Secure closure provides warmth and protection from the elements.

A stylish clip-in spin shoe designed for performance on the stationary bike and comfort during pre- and post-workout routines. All of the workout. None of the routine. Bontrager's all-new Cadence Spin Shoe brings performance and style to the spin studio. It's designed to help you ride beyond your fitness and indoor cycling goals, delivering the right fit for intervals on the spin bike, comfort during pre-ride stretches and post-ride burpees, and endless style on or off the bike. Compatible with two-bolt, SPD-style cleats. Product details - inForm Athletic last offers a roomier fit for on- and off-bike comfort - A single BOA L6 dial for precision fit and easy micro-adjustments - Mesh main material in upper allows for maximum breathability - Cushioned EVA foam midsole for all-day comfort - Sturdy sole with great traction for excellent walkability - 2-bolt SPD-style compatible (cleats and pedals sold separately) - Slip-on construction makes for easy on-and-off and ensures neoprene tongue stays put - Heel counter provides great heel lock for power transfer and prevents heel slip with cats' tongue material

A new standard Trek Velocis Road Cycling Shoe is a high-performance road shoe designed for committed cyclists who need power and everlasting comfort on every road ride, no matter the distance. All-new METNET relief zones deliver flex in all the right places. Two Li2 BOA dials provide a secure and precise fit. A carbon composite plate ensures excellent power transfer. - METNET relief zones stretch and conform to the foot to relieve common hot spots and discomfort - InForm Pro Last provides an ergonomically optimized, high-performance fit - Dual Li2 BOA dials provide low-profile, on-the-fly micro-adjustability for a precision fit - OCLV Carbon and fiberglass composite plate provides excellent power transfer - Compatible with 3-bolt cleat systems

Body Geometry Footbeds are ergonomically designed and scientifically tested to increase power, endurance, and comfort by optimizing hip, knee, and foot alignment. With three different arch support options (Red+ being the lowest, Blue++ being in the middle, and Green+++ being tallest), you can be sure that every precious watt is preserved through the pedal stroke. - Body Geometry Footbeds measurably increase power, reduce time to exhaustion, and reduce injury by aligning hip, knee, and foot. - Customized longitudinal arch and metatarsal support with Red+, Blue++, or Green+++ contour. - Proprietary lightweight foam avoids taking a compression set for long-lasting performance. - Combine Body Geometry shoes, footbeds, and wedges to maximize performance benefits.

Take the performance and Body Geometry ergonomics of our high-end road shoes, put them in an affordable design, and you basically have the Torch 1.0 Road shoes. For the closure, we added a single, lightweight Boa L6 dial that features tool-free snap replacement capability while also providing simple, on-the-fly micro-adjustments. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - With a 6.0 Stiffness index, the injection-molded nylon composite sole is engineered to be moderately stiff and plenty light. - Lightweight Boa L6 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - Synthetic upper for supple feel over the foot. - Reflective heel elements increase your visibility to motorists in low-light conditions. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 290g (1/2 pair, Size 42)

If you're ready to step up to a higher-performing option that looks good and feels great, the Torch 2.0 is the perfect upgrade for you. The Torch 2.0 is the ideal intersection of high performance and comfort, offering you a pair of shoes you can count on, whether you're joining their first group ride or clipping into the spin bike to get their sweat on. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Woven Carbon sole engineered to be stiff, yet light with a large rubber heel and toe for off-the-bike traction. - BOA Li2 dial for dual direction micro-adjustments and pop release, forefoot strap for fine-tuning fit - Seamless Synthetic upper for a supple fit. All over laser perforation added breathability - Internal heel counter provides a supportive and secure heel fit - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 268g (1/2 pair, Size 42)

Clipless-compatible mountain biking shoes for gravity-fueled riding. Seek out epic new descents or muscle through rough terrain. These adidas Five Ten Hellcat Mountain Bike Shoes provide all-conditions comfort and precision geared towards enduro and downhill rides. They're wide and stiff enough to give a controlled-pedal feel plus durable and impact-resistant. Riding clipless or flat, they offer the grip to power down your line. This product is made with recycled content as part of our ambition to end plastic waste. 20% of pieces used to make the upper are made with minimum 50% recycled content. SPECIFICATIONS - Regular fit - Lace and hook-and-loop closures - Coated leather upper - Molded sockliner - Stealth Marathon rubber outsole - Clipless-compatible - Imported

The Recon 2.0 was made for riders who seek out dirt roads and challenging trails in search of a shoe that delivers comfort and efficiency in a durable package, with the scientifically proven performance benefits of Body Geometry. Whether you’re saddling up a Diverge or Creo to ride with your gravel group or hopping on your epic to embark on an all-day trail session, the Recon 2.0 is your partner in crime for days spent in the dirt. Body Geometry: Like every Body Geometry shoe, the Recon 2.0 is ergonomically designed and scientifically proven to improve comfort, increase performance, and reduce the chance of injury for every rider with patented technology, while improving power by 7 watts - validated by science. Stride Technology: Stride technology provides a flexible outsole and upper around the toe box combined with a stiff cleat pocket, enabling the shoe to easily flex when walking and remain stiff and efficient when pedaling. Efficiency: The Recon 2.0 features a Li2 Boa Dial for adjustability on the fly, making getting in and out of the shoe a breeze. BOA soft-lace cables made from a Dyneema yarn allow us to do away with hard molded guides for a more comfortable fit. The forefoot strap above the toes helps riders adjust volume around their toes to tailor the fit to their unique foot, connecting you to the bike for confidence when hitting a new feature or tackling loose and technical gravel. - Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Injection STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling: Stiffness index 6.0 - Welded upper reduces seams for superior step-in comfort. - BOA® Li2 dials for on-the-fly micro-adjustment. - SlipNot™ rubber tread for confident traction on all terrain. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 307g (1/2 pair, Size 42)

The Recon 3.0 is all about putting the legendary performance of our S-Works Recon - power transfer, comfort, light weight, style - in a package perfect for the XC and gravel rider. Starting with Body Geometry, Recon 3.0 delivers comfort and efficiency, with features that stand-out off the beaten path. Looking for in the saddle speed as well as off-bike performance? Recon 3.0 mates a carbon outsole with a Pave-inspired glass fiber forefoot to create Carbon STRIDE toe-flex, which lets your foot function naturally off the bike, yet still provides incredible power transfer with a stiffness index of 10.0. Whether you're flying up a run-up on the 'cross course or strolling into the brewhouse post ride, STRIDE toe-flex is a game changer. We know venturing off-road means venturing into the unknown, so we've given the Recon 3.0 XPEL Mesh to create a comfortable fit that sheds water, keeping the shoe light and making it dry as fast as it rides. Our SlipNot compound provides full rubber coverage of the outsole for off bike traction on any surface, with open treads to eject mud. Dual L6-Snap Boas and a Velcro forefoot closure ensure micro adjustable comfort with a secure fit designed for all day comfort and performance, whether your ride calls for open gravel, twisting single track, and more than your fair share of hike-a-bike. - Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Carbon STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling: Stiffness Index 10.0) - Fully-welded upper reduces seams for superior step-in comfort. - Independent BOA L6-Snap dials for on-the-fly micro-adjustment. - SlipNot rubber tread for confident traction on all terrain with removable toe studs. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 355g (1/2 pair, Size 42)

The Recon 1.0 was made for riders who set out on two wheels to seek the great outdoors and saddle up their bike for the adventure ahead, with the scientifically proven performance benefits of Body Geometry.The Recon 1.0’s purpose is to add confidence and functionality for riders who push their limits uphill for an unforgettable view, maybe are even clipping in for the first time, or are hopping on their trainer for an after-work hammer session on the spin bike. Comfort and versatility are key, and that’s what the Recon 1.0 was made for. Body Geometry: Like every Body Geometry shoe, the Recon 1.0 is ergonomically designed and scientifically proven to improve comfort, increase performance, and reduce the chance of injury for every rider with patented technology, while improving power by 7 watts - validated by science. Stride Technology: Stride technology provides a flexible outsole and upper around the toe box combined with a stiff cleat pocket, enabling the shoe to easily flex when walking and remain stiff and efficient when pedaling. Efficiency: The Recon 1.0 utilizes an L6 Boa Dial with soft-lace cables made from a Dyneema yarn, eliminating unwanted stretch while removing hard molded guides to give riders a more supple upper that comfortably conforms to the foot. Additionally, the outsole is optimized to put your power on the pedal through balanced stiffness. - Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Injection STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling (stiffness index 6.0) - L6 BOA® Dial with soft-lace cables made from a Dyneema yarn. - SlipNot™ rubber tread for confident traction on all terrain. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 291g (1/2 pair, Size 42)

This shoe cover is as committed as you are to riding through the wettest weather, thanks to three-layer waterproof/breathable fabric that blocks wind and stops rain in its tracks. The WRX Shoe cover works with both road and mountain bike shoes and can be used with standard footwear as well. (We suggest sizing up for flat pedal and street shoes). A two-stage hook and loop closure makes it easy to pull these on and keeps the elements at bay. BioViz® reflective elements on the toe, side, and heel increase low-light visibility. FEATURES: - Made with recycled materials - Compatible with road, mountain, and standard shoes - We suggest sizing up for mountain bike or street shoes - Three-layer waterproof breathable fabric blocks wind and water - Two-stage hook and loop closures for installation and removal - BioViz® reflective elements increase low-light visibility FABRIC: - 87% polyester, 13% nylon

Reach for this shoe cover on those cold days when you're not taking no for an answer. This is our very warmest shoe cover, thanks to three-layer AmFIB softshell fabric and a quilted lining with 100g Primaloft Gold with Crosscore technology. Plus, a durable water-repellent (DWR) finish keeps your feet dry through most conditions. Our anatomic design eliminates the bunching that can happen near the top of the pedal stroke, and the patented two-stage hook-and-loop closure makes them easy to put on and take off, solving one of the most frustrating parts of using shoe covers. - AmFIB Softshell provides superior wind and water protection - 100g Primaloft Gold w/Crosscore technology insulation is made from 35% post-consumer recycled polyester and incorporates Aerogel particles for incredible warmth with minimal weight - Patented two-stage hook-and-loop closure provides both sleek fit and easy on and off - Anatomic paneling for a performance fit - BioViz reflective elements for low-light visibility - Main Body: 37% polyurethane, 33% polyester, 20% polyamide, 10% CORDURA - Lining: 100% polyamide - Made in Vietnam

The new S-Works 7 Lace takes the performance of the winningest road shoe in the world and combines it with laces to create one of our most supple and adaptable uppers for next-level fit. Paired with our Body Geometry technology for optimum foot, knee, and ankle alignment, going fast never looked so good. By utilizing laces, the shoe offers 12 separate points of tension adjustment to dial in the perfect hold across the entire foot, while the removal of plastic hardware allows the engineered mesh upper to adapt to more foot shapes for a sublime, supple fit. The S-Works 7 Lace fits like a leather glove, but you know, for your foot and made of engineered mesh and carbon. But laces have more to bring to the party. The removal of plastic hardware also shaves considerable weight. One size 44 S-Works 7 Lace weighs a feathery 236 grams, so you’ll be looking good and feeling good when the road points uphill. The foundation for all this is the technology pioneered for the S-Works 7. Our Powerline carbon outsole—our lightest and stiffest outsole ever—creates the ideal platform for power delivery. Our PadLock heel comfortably holds the rear of your foot, while the engineered mesh upper delivers a stable yet supple hold for all-day power delivery. Whether you’re looking for a relaxed coffee ride shoe, a lightweight climber, or a supple and adaptive fit that compliments your race shoe, the S-Works 7 Lace marries classic style to race-winning heritage and performance. - Body Geometry sole and footbed are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Non-stretch laces provide even hold across the entire foot that stays consistent all ride long. - Our stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15.0. - Engineered mesh is combined with no-stretch TPU zones for the ultimate connection and comfort. - PadLock™ heel construction cradles the heel and is proven to improve acceleration. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Three-bolt cleat pattern fits all major road pedals. - Approximately 236g per shoe (size 44)

When warm socks aren't enough, but waterproof shoe covers are too much, our Reflect Overshoe Socks are your ticket to warm toes. They're made from an abrasion-resistant, knitted yarn that not only adds an extra layer of warmth, but ensures you'll be using them for seasons to come. At the top of the overshoe, you'll find a reflective band that helps increase your visibility in low light conditions. - Anti-abrasion knitted yarn was used to provide long-term durability. - Reflective band across the top increases your visibility to motorists in low-light conditions. - Made for riding in transitional weather. - Two-hole cutout on the sole makes it compatible with road shoe cleats and walking pads.

IP1-Snap Boa® cartridge assembly for Expert Road and Women's Zante Road shoes. - Includes one cartridge dial assembly and lace. - Left- and Right-specific. - Not for resale, for warranty replacement

- Allows installation of 2-bolt SPD-style cleats on select Bontrager Road shoes - Compatible with Bontrager road shoes with nylon sole - Adapter plate replaces rubber plug in sole of shoes - Packaged as pairs

Mountain bike shoes for aggressive, gravity-fueled riding. Downhill or enduro, these adidas Five Ten Hellcat Pro Mountain Bike Shoes offer all-conditions control for gravity-fueled riding. Cleat-compatible with a stiff midsole, they allow for aggressive pedaling. A synthetic upper with abrasion-resistant weldings provides extra durability. Non-marking Stealth Marathon rubber grips pedals and ground alike. This product is made with recycled content as part of our ambition to end plastic waste. 20% of pieces used to make the upper are made with minimum 50% recycled content. SPECIFICATIONS - Regular fit - Lace and hook-and-loop closure - Textile upper - Molded sockliner - Abrasion-resistant weldings - Clipless-compatible - Stealth Marathon rubber outsole - Imported

Women's performance indoor SPD cycling shoes with a comfortable fit and maximum breathability. - Breathable, comfortable sock mesh upper designed for hard workouts - Easily open, tighten, and adjust fit with Boa L6 dial - Full-length reinforced plate provides stable power transfer - Full-length rubber sole enhances walking comfort - Women's specific performance DYNALAST for a natural, comfortable fit

When the moment comes for an attack in the hills, a long solo move, or a full gas sprint for the line, every watt counts, which is why we designed the S-Works Ares to be the most efficient and powerful performance shoe ever made. We combined decades of Body Geometry development with obsessive innovation working with the world's best athletes to completely reimagine the race shoe. An entirely new, patent-pending closure system, Dyneema-reinforced toungless sock, and ultra-stiff FACT Powerline carbon outsole eliminate foot roll, reduce pressure on tendons, and transfer every ounce of power to the pedals for unprecedented performance and comfort. It's 1% faster than any shoe we've ever made, and at the finish line, that's all that matters. - The key to more comfort, less injuries, and higher power output comes from our ergonomically designed, scientifically tested Body Geometry features-Longitudinal Arch, Varus Wedge, and personalized insoles with a Metatarsal Button. When used in harmony, these three features align the hip, foot, and knee, while also limiting medial/lateral knee movement and maintaining good circulation down to your toes. - Patent-pending closure design secures the foot for extreme, out-of-saddle efforts, locking the metatarsals and preventing lateral roll. - Dyneema is sandwiched between layers of synthetic and TPU to create no-stretch zones for the ultimate connection and comfort. - Our stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15. - Independent BOA Li2 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Titanium alloy cleat nuts can rotate to position cleats 5mm rearward and fits all major 3-hole road pedals. - Approximate weight: 220g (1/2 pair, Size 42)

For top comfort, Planet Bike's Blitzen Shoe Covers are made of windproof fabric lined with microfleece to keep you warm. They boast Velcro closures for easy on/off and reflective accents for safety.

Replacement tread for S-Works 7 Road shoes. - Heel Lugs only. - Sold in pairs with screws.

Moisture management is one of the most important elements of winter cycling and can make or break a ride. On long rides in extreme conditions, having a spare pair of 45NRTH's Wølfgar boot liners means you can ride confidently knowing that you have a dry, fresh pair when you need it. Constructed with a wool/polyester blend for durability, Wølfgar's liner boot wicks moisture away from your skin while still maintaining its insulation value to keep your feet dry and comfortable. Hook-and-loop on the heel secures the liner inside the shell boot. For use with 45NRTH Wølfgar boots only (sold separately)

The Blitz Road Shoes use Bont's industry-leading anatomical shaping and power transfer system. Combined with their 100% thermo moldable carbon chassis, they create high performance cycling shoes with unparalleled comfort at unbeatable value. Constructed with high grade Microfiber, the Blitzes stand up to the rigors of everyday cycling while mesh inserts assist with breathability. Full 3K carbon construction of the chassis ensures maximum stiffness and efficiency at an incredibly low weight. Bont Cycling's proprietary thermo moldable resin ensures the fit customization of the shoes, while the BOA dial and a forefoot velcro strap ensures micro adjustability of the fit. The Blitz is highly ventilated via integrated top mesh panels and ventilation holes throughout the side microfiber panels.

- Hyper Green and Black is paired with unique reflective trims to drastically increase your visibility to motorists 24-hours a day. - Anti-abrasion knitted yarn was used to provide long-term durability. - Reflective band across the top increases your visibilty to motorists in low-light conditions. - Made for riding in transitional weather. - Two-hole cutout on the sole makes it compatible with road shoe cleats and walking pads.

- Model: Vaypor XC - Material: Carbon Composite chassis with Durolite Upper & Faux Seude Leather Liner - Stack Height: 4.4 mm - Air Vents: Frontal area air vents - Innersole: EVA thermo-moldable - Sole Guards: Replaceable - Padding: Memory Foam - Cleat Mounting: MM grid plus grip / SPD compatible - Fit Customization: Fully Heat Moldable Chassis utilizing Epoxy Thermoset Resin - Closing Options: Z form Velcro Straps + Boa dial (replaceable) - Weight: 385 grams - Color Options: Black only

Flat-pedal mountain bike shoes for gravity and enduro riding. Choose your line and let it roll. The adidas Five Ten Impact Pro shoes set the standard for flat-pedal mountain bike control. Pedal-gripping tread and a wide, stiff platform support aggressive enduro and gravity riding. Go ahead and send it. PEDAL-GRIPPING CONTROL Stealth S1 rubber provides unmatched pedal grip. WIDE, STIFF PLATFORM Reinforced midsole provides a stiff platform for aggressive riding. IMPACT RESISTANT PORON reinforced toe box adds impact resistance. SPECIFICATIONS - Lace closure - Quick-dry synthetic upper with reinforced toe box - Stiff, supportive feel - Gravity-minded mountain biking shoes - Compression-molded PU midsole - Stealth S1 rubber outsole - Imported

We all have our tricks for successful cold-weather riding. Want to know ours? Neoprene Shoe Covers. Made for cold, wet, and windy days on the bike, stretchy neoprene and fully taped seams help keep feet dry and comfortable mile after mile. Whether you’re suiting up for a gravel adventure or a road ride, the universal cleat opening makes it easy to pull on over your preferred cycling shoe type. Abrasion-resistant panels in high-wear areas add durability. - Abrasion-resistant toe and heel sole with universal welted hook-and-loop closure, so covers are compatible with both road and mountain shoes. - Fabric Content: 100% Polyester

Neoshell Rain Shoe Cover from Specialized.

Made for winter hikes, snowshoe adventures, and long, cold days outdoors, the adidas Terrex winter boots are waterproof and fully insulated. COLD.RDY with PrimaLoft® wraps your foot in heat-sealing warmth, while RAIN.RDY seals out slush, snow, and rain to keep feet dry all day long. A BOA® Fit System lets you dial in a precise fit for confident footing. A BOOST midsole cushions and brings energy to every step, on and off the snow and in all temperatures. The Stealth winter grip rubber provides high-friction traction for confident footing on slick, icy ground. - BOA® Fit System for micro-adjustment, effortless on-and-off, and secure, consistent hold - Designed to insulate your body in cold weather — stay warm with adidas COLD.RDY - Waterproof textile upper with molded toe cap and external heel clip - PrimaLoft® Parley insulation keeps your feet warm all-day - adidas BOOST delivers incredible energy return and instant comfort with each step to keep you going

No-slip, no-trip Finish a road ride and stroll into the coffee shop like you own the place with the stiff-yet-walkable outsole of Cortado women's cycling shoe. With this premium road shoe, you don’t have to decide between performance and walkability. Key features - inForm Race last offers a slightly roomier, high-performance fit - Glass-reinforced internal nylon plate with full Tachyon rubber outsole - Boa IP1 dial for precise two-way adjustment - Compatible with 2-bolt SPD-style cleats - Stiffness index - 6 of 14 - Women's Specific Design is engineered specifically to yield a better fit and greater comfort for women Details - Upper Fiber Content - 56.9% PU / 10.5% Polyester / 32.2% Nylon / 0.4% Steel - Sole Fiber Content - 100% Rubber - Liner Fiber Content - 100% Polyester

Composite wear plate protects cleat mounting area on Drako Carbon SRS soles.

Shot 2 Anti Slip Heel Insert. Sold in pairs.

Ride further, whatever the terrain, whatever the bike, whatever the destination. The Sidi Eagle 10 is the best shoe for any day on the dirt, whatever your riding style. The Microtech upper, the first microfiber introduced in cycling shoes years ago by Sidi, is the most comfortable Sidi has ever offered, while the sole is designed to ensure the ideal combination of performance and comfort both on and off the bike. -The Soft Instep Closure System is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area -The Instep Closure System is adjustable from both sides, to perfectly center the EVA pad over a high or low instep, ensuring an ideal fit -The Tecno-3 System dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit -The all new proprietary SIDI Wire monofilament is completely non-binding for intuitive and effortless on-the-fly adjustments -The integrated heel cup, with a new light weight design is reinforced to avoid deformation during the most grueling of rides -The reflective inserts on the heel improve safety on the road, helping to signal the presence of the cyclist in conditions of poor visibility -The shape of the tread has been specifically designed for mountain biking, allowing improved grip, superior mud dispersion and great stability -The toe inserts are easily replaceable and offer the ability to mount crampons for particularly muddy rides -The Sidi MTB SR17 sole represents an ideal balance of stiffness for efficient power transfer and flexibility and comfort for walking -The women's specific fit is narrower across the ball of the foot and features less volume inn the instep area and a narrower heel cup

Tecno 4 Push Tensioner system for Sidi Sixy shoes.

Tecno 3 Push Tensioner Original part replacement tensioner for Genius 10, Alba 2, Alba, Dominator 10, Trace 2, Trace.

LIGHTWEIGHT ROAD PERFORMANCE SHOES WITH S-PHYRE DNA. FEATURES - Mesh/TPU and Synthetic leather material covered upper in optimized part to provides comfortable fit and light weight. - Surround wrapping upper structure reduces overlap and provides a glove-like fit. - Integrated seamless midsole and upper construction set a new level of fit, stability and lightweight performance. - BOA® L6 dial on instep strap quickly and comfortably secures a wide range of foot shapes. - Carbon fiber reinforced nylon midsole for power transfer. - Low stack height midsole stabilizes foot and maximizes power transfer efficiency.

LIGHTWEIGHT WOMEN'S ROAD PERFORMANCE SHOES WITH S-PHYRE DNA. FEATURES - Mesh/TPU and Synthetic leather material covered upper in optimized part to provides comfortable fit and light weight. - Surround wrapping upper structure reduces overlap and provides a glove-like fit. - Integrated seamless midsole and upper construction set a new level of fit, stability and lightweight performance. - BOA® L6 dial on instep strap quickly and comfortably secures a wide range of foot shapes. - Carbon fiber reinforced nylon midsole for power transfer. - Women’s specific last for a natural, comfortable fit. - Low stack height midsole helps stabilize foot, maximizes power transfer and efficiency.

Replacement tread blocks for 2013 and newer full carbon Drako/Tiger.

If you're looking for a versatile MTB shoe that can transition from hot laps in the park to cold beers at the base without missing a step, then look no further. The 2FO Roost Flat brings a casual, relaxed vibe with all the right DNA to get sendy on the bike. It combines a durable leather and textile upper, cushioned EVA foam midsole and relaxed fit last that can stand up to the rigors of daily trail use without sacrificing off-the-bike comfort and style. Last but not least, a new SlipNot ST rubber sole delivers unsurpassed flat-pedal grip and connection when things get rowdy. - Approximate weight: 360g (1/2 pair, Size 42). - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - Cushioned EVA foam midsole for comfort and impact absorption. - Leather and textile upper with added protection keeps you comfortable and is built to last. - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. - SlipNot ST rubber sole for unsurpassed flat-pedal grip and connection.

Superior simplicity Quantum is a no-nonsense mountain bike shoe perfect for anyone looking to clip-in and hit the trails. This two-bolt compatible shoe features the reliable adjustability of three zonal hook-and-loop straps, so you always stay comfortable and secure when pushing the pedals. If you want to look sleek and sophisticated, look to Quantum for a more efficient ride. A functional, confidence-inspiring off-road cycling shoe for riders who are venturing into the clip-in riding experience. - inForm Race last offers a slightly roomier, high-performance fit - Three hook-and-loop closure straps provide a wide range of adjustability - Durable synthetic uppers are perforated for breathability, and hold up to the demands of all off-road riding - Rugged, GnarGuard outer material at toe and heel protects against abrasions and trail debris - Nylon composite Bronze Series sole provides stiff, yet walkable performance - Stiffness index 6 of 14 offers some forgiveness and elevates comfort - Tachyon rubber lugs allow reliable grip and traction in all types of terrain - Compatible with 2-bolt SPD-style cleats, plus placement indicators guide proper cleat installation and alignment

Women's indoor SPD cycling shoes with the comfort, walkability, and style of a sneaker. - Breathable, comfortable sock mesh upper designed for hard workouts - Easily open, tighten, and adjust fit with a single Boa L6 dial - Mid-length plate provides pedaling stability while maintaining off-the-bike comfort - Shock-absorbing EVA mid sole maximizes walking comfort - Women's specific higher volume last for a natural, comfortable fit - Easy SPD cleat installation

To Slip or SlipNot™; 2FO Roost delivers grip, durability, and light-weight unmatched by any trail shoe. The SlipNot™ sole sets the standard for stickiness, traction, durability, and pedal feel. Built with a fully synthetic upper and Airmesh padding—meaning the 2FO Roost is super light-weight, comfortable, and durable, and for those times when you go full-submarine, it dries really fast. - UNMATCHED GRIP: SlipNot™ rubber outsole offers unmatched traction, grip, and pedal feel. - DURABILITY: Every detail designed for durability on the dirt, from upper to outsole to toe-kick to heel-cup, and everything in between. Offering superior support, durability, and fast drying for year-round riding. - PROTECTION: Forefoot TPU toecap offers protection from stones and roots on fast technical descents. - SUPPORT: Internal heel counter adds support without bulk. - PADDED PERFORMANCE: Foam core midsole for vibration damping and cushioning. - LACED UP: Laces and eyelets offer easily adjustable comfort and a locked-in fit - BODY GEOMETRY: Sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment.

COMFORTABLE, SURE-FOOTED TOURING SHOES FOR ACTIVE OUTDOOR LIFESTYLES. FEATURES - The high-performance off-road cycling shoe with walkability of light hiking shoes. - Secure speed lacing system with instep strap for fast and easy fit adjustments. - Lightweight, sporty mesh-paneled upper fits securely and breathes well. - Glass fiber reinforced shank plate for optimal sole rigidity. - Shock absorbent EVA midsole and rubber outsole for comfort on and off the bike.

Just because winning an XC World Cup isn't on your to-do list, doesn't mean you don't value performance and comfort. Recon 2.0 is your shoe. Inspired by S-Works Recon, with Body Geometry comfort and efficiency, Recon 2.0 puts all that performance within easy reach. Using our exclusive STRIDE toe-flex technology, the nylon outsole uses a TPU-injected forefoot for natural movement off-bike, while still providing a stiffness index of 6.0 for in-the-saddle performance. We've also lifted the heel for an even more natural feeling while walking. To create traction off the bike in wet or dry, gravel or dirt, we've covered the nylon outsole with our SlipNot compound. If the traction's needed in the wet, you can also rest easy knowing the XPEL mesh used through the Recon 2.0 won't get bogged down with water and will dry exceptionally quickly. No more wet shoes the morning after a wet ride. An L6-Snap Boa and a Velcro forefoot closure ensure micro-adjustable comfort with a secure fit designed for all-day comfort and performance, whether your ride calls for open gravel, twisting single track, and more than your fair share of hike-a-bike. - Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Injection STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling: Stiffness index 6.0 - Welded upper reduces seams for superior step-in comfort. - BOA L6-Snap dials for on-the-fly micro-adjustment. - SlipNot rubber tread for confident traction on all terrain. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 357g (1/2 pair, Size 42)

Built for high-alpine terrain, the Rime 2.0 Hydroguard brings rugged capability to ensure you can conquer any mountain trail in any conditions. The internal Hydroguard membrane helps keep your feet dry through stream crossings, puddles, and splashes and prevents the shoe from becoming water-logged. Our Lollipop midsole construction is paired with a gnarly Vibram rubber outsole creating unmatched off-bike push-ability for getting over any unrideable terrain. For closure, a standard lace is paired with an L6 Boa for a precise fit, on-bike adjustability, and redundancy to keep you riding when you're in the backcountry. - Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency, optimize hip, knee, and foot alignment, and reduce injury risks. - Internal Hydroguard membrane keeps feet dry through puddles, splashes, and stream crossings. - Upper is treated with DWR for water repellency and easy cleaning. - Landing Strip cleat pocket is optimized for effortless foot-out riding style with platform clip pedals. - Boa L6 dials for easy adjustment, backed by the Boa Lifetime Guarantee. - Stiff Lollipop nylon composite plate for high performance pedaling and off-the-bike comfort. - Vibram rubber sole for confident traction. - Cushioned EVA foam midsole for comfort with molded heel cup for stability. - Relaxed Fit last for a balance of pedal feel and off-bike comfort. - Two-bolt cleat pattern fits all major mountain pedals.

Performance Sneaker Style Riding The performance sneaker that keeps you cool and in control. The Leatt MTB 3.0 shoe is a performance shoe offering great protection and comfort. The padded tongue, raised inner padded side wall, as well as toe and heal protection make this a solid shoe for tough Enduro and downhill riding. The toe box vents are also sealed with a MoistureCool material—keeping your feet dry and ventilated. It features a medium stiff sole, thanks to a specially developed shank which regulates torsion and flexibility. This shank is the reason Leatt shoes give you great control on the bike, but also lets you also walk around with ease. What’s special about the Leatt shoe? Our secret rubber recipe is like your grandma’s hot sauce: better than anyone else’s! The unique production method offers incredible RideGrip for ultimate bike control in all weather conditions. The sole also features mud channels, which efficiently keep the mud off the soles, so that you are in constant contact with your pedals or the ground. If you want to stay on top of the game, then you need the Leatt MTB shoes. - FlatGrip Sole designed to always keep you in control: Optimized waffle grip pattern in pedal area for superior pin grip - Heel and toe mud flow channels for grip in all weather conditions - RideGrip Compound delivers amazing riding feel in all weather conditions: Sticky Leatt Lab compound sole for ultimate bike control - Maximum tear, puncture and abrasion resistance - The shoes upper makes them very durable all weather shoes: Synthetic Leather with synthetic suede toe box - Ventilation with waterproof /breathable membrane on the inside - Unique to Leatt compression laces for a tight riding fit that do not come loose when riding - Control Flex Shank: Medium-hard Flex control for great bike feel - Midsole: Anti-compression midsole for comfort - Protection: Inner ankle mid height protection - Molded stabilizing heel and rigid reinforced toe area - Lining: Active Carbon moisture wicking, quick dry, anti-bacteria, anti-odor material for comfort and hygiene - Heel Grip: Anti-heel lift grip design - Weight: From 950g

Replacement tread blocks for 2013 and newer full carbon Drako/Tiger.

Reflective Adjustable Retention System from Sidi.

Adjustable Heel Retention System from Sidi.

With the Recon 1.0 our goal was simple—put S-Works Recon-inspired performance in a very accessible package. Easier said than done, but we’ve created a shoe with Body Geometry comfort and efficiency in a durable, dirt-focused shoe. So yeah, mission accomplished. Using our exclusive STRIDE toe-flex technology, the nylon outsole uses a TPU injected forefoot for natural movement off-bike, while still providing a stiffness index of 6.0 for in-the-saddle performance. The Recon 1.0 is a double threat—efficiency at the pedals with comfort and confidence off bike. To create traction off the bike in wet or dry, gravel or dirt, we’ve covered the nylon outsole with our SlipNot compound. We’ve also lifted the heel for an even more natural feeling while walking. Three Velcro closures make slipping into the Recon 1.0 easy, and creates a fit designed for all day comfort and performance, whether your ride calls for open gravel, twisting single track, and even more than your fair share of hike-a-bike. - Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Injection STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling (stiffness index 6.0) - SlipNot rubber tread for confident traction on all terrain. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 331g (1/2 pair, Size 42)