$25.00 - $40.00
- Anti-Loosening, Anti-Corrosion thread prep with PTFE - Two colors offer coating for different spoke lengths
BB30 service kit for SRAM DUB cranks. - Includes (2) Enduro 6806/29 ABEC-3 sealed bearings and 2 retaining clips - Bearing Dimensions: OD: 42mm / ID: 29mm / Width: 7mm - Enduro ABEC-3 bearings - Use with SRAM DUB cranks Note: SRAM DUB cranksets are not designed to work in 68mm or 73mm wide shells with inboard bearings. Use only if your frame is a direct-fit bearing system, and the BB shell width is 86.5mm or wider.
$7.50 - $15.00
Another must-have tool for the busy bike shop. Wheels Mfg. machined aluminum Speed Spacers take up extra space on your bearing press so you don't need to spin the handles as far to tighten things up. They also work in axle configurations where you need to press in a bearing over an axle. - Machined Aluminum - Anodized Red - Sold individually Compatible with: - PRESS-4 - Economy Press - PRESS-1 - Large Sealed Bearing Press - PRESS-1-HNASSY - Handle & Rod Assembly
Hirobel is a specially designed clamp for bicycle repair stands that makes it easier to work on your bike. It better distributes stresses and loads through the bicycle frame, offering superior stability while eliminating possible crushing or damage to thin-walled and shaped tubing. The pressure clamps used on contemporary workstands were developed for round steel tubing more than 40 years ago, predating carbon fiber, aluminum, aerodynamic and oversized tube shapes, integrated seat masts, dropper posts, and suspension systems. These legacy designs assume your bicycle tubing to be both round and straight, and when it is not, the clamp can impart very high point loads at the clamp edges causing finish damage, internal carbon layup damage, or outright crushing of tubes on the lightest designs. With Hirobel, specially shaped, paint-friendly cones and bindings cradle the frame at the tube intersections, where wall thicknesses are higher and forces can be distributed over much larger surface areas. Adjustable and adaptable for any possible frame design, the Hirobel also allows the repair stand clamp to be located closer to the bicycle center of gravity. This improves stability and eliminates bouncing of the bike during heavier work while also locating the drivetrain consistently higher for the mechanic, improving visibility while reducing back strain.
SRAM's Disc Brake Bleed Kit has everything you need to ensure your brakes are dialed. The kit is compatible with SRAM X0, XX, Guide, and HydroR brakes. It is not compatible with RockShox' fork bleed kit. Includes the following: • 2 syringes/fittings • bleed blocks • Torx tool • Crow's foot • Bleeding Edge Fitting • DOT 5.1 hydraulic fluid
- Easy to use tool for checking chain wear
$10.00 - $23.00
• Service kits include air can seals and wiper • Available for RockShox air rear shocks--Ario, Monarch, Monarch RT3, DebonAir and Monarch Plus
This kit contains all the parts needed for scheduled maintenance and/or rebuild of A2 non-Stealth Reverb Seatposts. - Includes new, upgraded IFP - Requires RockShox Specialty Tools to perform Service: Oil Height Tool, IFP Height Tool
$5.00 - $36.99
RockShox's Suspension Oil comes in different weights to match the most popular suspension fork and shock setups.
$13.99 - $20.99
Rock-N-Roll Extreme is a very clean lubricant due to its ability to shed dirt and dust. - For mountain bike or wet road riding
Portland Design Works' 3wrencho is a strong and versatile addition to your fixed gear, townie or workbench! Made of heat-treated steel for extra toughness, it's part tire lever, part 15mm wrench. Its strong nylon coating won't scratch rims, so you can pry as hard as you need to remove stubborn tires. Step on the 3wrencho for extra leverage to loosening axle nuts. May also be used to spread peanut butter, stir a drink, or open a letter. - Length: 114 mm (4.5") - Weight: 95 g (3.5 oz)
This professional quality adjusting cap tool is used to install and remove adjusting caps of Shimano Hollowtech II crank/bottom bracket systems. The unique, dual-density, screwdriver handle provides improved ergonomics and comfort while assisting in control of torque applied to the cap. The precision laser-cut tool bit is made from heat-treated tool steel for strength and durability. - Ergonomic dual-density screw driver handle for comfort and torque control - Tool bit is precision laser-cut, heat-treated, tool steel for strength and durability
$9.50 - $65.00
Degreaser 13 takes degreasing chemistry to new levels with performance that must be seen to be believed. Your drivetrain hasn't been this clean since the day you bought it! Developed from scratch, specifically for the challenges of bicycle drivetrain degreasing, the advanced formula is engineered to fight its way to metal surfaces and stay there, then attack and break free the bonds holding oils, soils, and grime in place, and finally dissolve and contain to carry it all away. Fully water soluble and further activated by light scrubbing and rinsing, the result is a spotless residue-free drivetrain with every surface cleaned completely. Pedro's advanced formula is also safe to use on any material, fully biodegradable, solvent-free, plant-derived, and zero-VOC.
$12.50 - $40.00
Formulated with Pedro's exclusive CleanTech Chemistry, Enduro Pemium Wet Lube blends advanced wet and dry lube technology for incredible wet lube performance in mixed to wet conditions, without the mess. Noticeably elevates efficiency, runs quiet, reduces wear, long-lasting, and fully water-proof. - Extreme lasting performance with less mess in mixed to wet conditions - Elevates efficiency, runs quiet, reduces wear, and fully waterproof - Safe plant-based ingredients
- Fits all 16-notch x 44mm external bearing bottom bracket cups and updated design also fits 16-notch x 44mm disc brake lockrings and Shimano TL-FC24 and TL-FC25 adapters. - Updated design features a square 3/8-inch drive. Also works with Pedro's snap-channel Pro Socket Handle, 24mm socket or wrench, or in a bench vise. - Professional quality, precision sized for the perfect fit. Pedro's socket tools provide the professional quality, precision-fit tools required to properly install, remove, and adjust modern drivetrain components. Pedro's designed each socket tool to fit perfectly, protecting the component and ensuring simple and safe usage for the mechanic. The new External Bottom Bracket Socket, 16x44 is designed to work seamlessly with Pedro's snap-channel Pro Socket handle, with any 24mm socket/wrench, with any square 3/8-inch drive, or in a bench vise. Fits 16-notch x 44mm external bearing bottom bracket cups including Shimano BB80, BB5700, XT BB70, BB51, and previous external bearing threaded cups. Also fits many external threaded types for Campagnolo, Chris King, FSA MegaExo, Hope, SRAM/Truvativ GXP, Race Face X-type, Surly, Wheels Mfg., and others. The new design will now also fits disc brake rotor lockrings with 16 external notches and Shimano TL-FC24 and TL-FC25 adapters. Backed by Pedro's lifetime warranty.
Torque wrenches are an essential bicycle tool. The increase in carbon fiber bikes and components have driven this need. While carbon fiber allows for more optimal design and provides higher strength to weight ratio compared to steel and aluminum, it is also more susceptible to crushing and cracking when improperly set up. Pedro's Fixed Torque Drivers are shop quality preset torque wrenches designed with an infinite torque-limiting clutch design to eliminate over-torquing of critical parts. Each wrench is calibrated using a torque calibration analyzer accurate to +/- 1% and is then tested 5 times prior to packaging with results recorded on the product card along with the date. A magnetic socket drive accepts standard 1/4" hex bits and 4mm, 5mm, and T25 bits are included with each wrench. The ergonomic handle design provides comfort and control ready for daily use while also storing two extra bits. - Infinite torque-limiting clutch design eliminates over-torquing - Magnetic socket drive accepts standard 1/4" hex bits. 4mm, 5mm, & T25 bits included - Ergonomic handle design provides comfort and control and stores extra bits
$10.00 - $40.00
Green Fizz's biodegradable solvent-free formula can be safely used on all parts and materials, including carbon fiber, without washing away grease and lubricants or damaging delicate parts. - Advanced plant-derived surfactants quickly remove tough dirt and grime from the whole bike - Use on the whole bike without risk of damage or washing away grease/lube from critical parts - Safe, biodegradeable, phosphate-free, solvent-free, plant-derived, and zero-VOC - Can be used with or without water
Universal spoke wrench designs are generally known for their low quality and awkward shape. The Pedro's Multi Spoke Wrench breaks this mold providing a shop quality spoke wrench in a compact, simple, ergonomic unibody design that feels good in your fingers and is perfect for the toolbox. Includes the three most common sizes. - Made from heat-treated tool steel for strength and long-lasting performance - Fits 3.2, 3.3, and 3.5mm spoke nipples
Pedro's Toothbrush is designed to tackle the drivetrain and is ideal for cleaning chains, cogs, derailleurs, and chainrings. The ergonomic handle is paired with two purpose-built brush features. The tapering-length bristles up front are designed to scrub the intricate surfaces of chains, chainrings and cassettes while at the opposite end, longer, stiffer, larger-diameter bristles reach deep between the cassette cogs to remove even the deepest dirt and grime. - Durable double-ended brush - Ideal for chains, cogs, derailleurs, and chainrings - Recommended for use with Pedro's cleaner and degreaser products (sold separately) - Solvent-resistant synthetic handle and bristles - Not recommended for oral use
Even in dense cities, riders often find themselves far away from home or a bike shop. Having the right multi-tool can be the difference between reaching your destination on time or taking the longest walk of your life carrying a busted bike. Pedro's has drawn upon its experience making professional shop tools to design the Trixie, the ultimate multi-tool for the fixed-gear urban rider. Pedro's Trixie is laser cut from 5mm thick heat-treated tool steel for the ultimate in strength and long-lasting performance. The tool's 187mm (7.4in) length and ergonomic shape provide outstanding leverage and comfort. Best of all, the Trixie mounts to your water bottle mounts with included wing nuts, ensuring you always have your tool when you need it. The Trixie features a 4mm/5mm hex bit in a rubber holder, 8, 9, 10, and 15mm box end wrenches, improved lockring wrench, and improved bottle opener.
$11.00 - $15.99
Y-Style Hex Wrench Ergonomic Y-style handle design. Designed to stand up to the harsh conditions of professional use. - Pedro's popular Y-Wrenches feature heat-treated tool steel construction and durable plastic body for strength and lasting performance. - The ergonomic shape provides excellent leverage and easy handling. - Perfect for common hex hardware found on modern bicycles and components. - Backed by Pedro's lifetime warranty.
Park combines the three most used bolt sizes into one convenient wrench. The 3-Way Sprocket Wrench sports 8, 9 and 10mm sockets made from forged chrome-vanadium steel in Park's classic Y-shape that offers plenty of leverage and a comfortable grip.
The BBT-22 is a shop-quality tool for installing and removing Shimano and ISIS Drive splined 20-tooth bottom bracket cups. Made from investment-cast steel, the BBT-22 ensures maximum engagement with the bottom bracket cup. It can be used with a 3/8-inch drive torque wrench, a 3/8-inch ratchet driver, a 32mm wrench, the Park FRW-1 Freewheel Remover Wrench (sold separately), or a 1-inch wrench.
The Bottom Bracket Wrench removes and installs Shimano Hollowtech II, Race Face X-type, FSA MegaExo, Campagnolo Ultra-Torque and TruVativ Giga X-pipe bottom brackets. Laser cut for a precise fit, one end of the BBT-9 securely engages the 16 cup notches, while the other end engages the 8 internal splines of the crankarm adjustment cap.
A dirty drivetrain causes poor shifting and unnecessary wear to expensive parts. The Chain Gang contains everything needed to quickly and easily clean the chain, freewheel cogs, and chainrings. The Chain Gang includes: - CM-5.3 Cyclone Chain Scrubber - GSC-1 GearClean Brush - 8 oz. bottle of Bio ChainBrite The CG-2.4 works on nearly any bike, including multi-speed, single-speed, and e-bikes.
Cleans bicycle chain quickly, easily, and effectively — without the hassle and mess of removing the chain from the bike. The Cyclone uses a large solvent reservoir, hundreds of rotating bristles, and a two-step cleaning process to get chains really clean, improve shifting performance, and extend the life of the chain and other expensive drivetrain parts. - Works with all multi-speed bikes (5, 6, 7, 8, 9, 10, 11, and 12-speed) as well as some single-speed models and e-bikes - Strong magnet at the bottom of the fluid reservoir holds metallic particles scrubbed from the chain - Special wicking sponge draws solvent from the chain as it exits, minimizing drips and mess - Sturdy handle makes the Cyclone easy to use and control - Holds 2 fluid ounces (59ml) of solvent
Park's Crank Puller is for removing crankarms on Shimano's splined, oversize, pipe-billet bottom brackets. It employs a long handle and a fine thread for the leverage and torque needed to remove tight arms. Park's unique rotating tip ensures smooth operation and long life. (The CCP-44 does not fit standard square or tapered bottom brackets.)
A favorite of shop mechanics for over 30 year's, Park's CCP-22 Crank Puller removes crankarms that feature square tapers, and those that fit on Power Drive and Power Spline bottom bracket interfaces. The long, comfortable, built-in handle and fine thread provide the leverage needed to remove even the tightest crankarms. And, there's a rotating tip to ensure smooth operation and long life.
12 splines, 22.6mm diameter fits Shimano, Sachs Aris, Sun Race, DNP Epoch, and other 5–10 speed freewheels. The FR-1.3 includes an enlarged thru-hole to accommodate 14mm axles.
Designed and built to remove and install Shimano direct mount chainring lockrings found on XTR 9120, XT 8120, MT900, and other Shimano direct mount systems. Precisely CNC machined from 6061 aluminum for a perfect fit and to prevent marring expensive parts. - Machined flat face for optimal lockring engagement - For lockrings with 41mm outside diameter and 16 notches - 36mm hex drive to be used with Park Tool TWB-36 Crow Foot and a torque wrench to properly measure torque - 6061 aluminum construction
Many chains use a master link that allows the chain to be installed and removed by hand. While master links don't require traditional chain tools, over time, dirt and corrosion can make it difficult to separate them by hand. Park's Master Link Pliers make removing and installing these master links quick and easy. Simply insert the specially sized jaws into the link and squeeze the vinyl-coated handles!
Park's Mini Chain Brute Chain Tool goes anywhere and features a V-shaped handle, a super-strong replaceable pin, and fine threads to make chain removal and installation a breeze. The CT-5 works on any derailleur chain, including Shimano Hyperglide and 9-, 10-, and 11-speed. It works for loosening tight links, too.
Choose the perfect tool for the job with Park's P-Handled Hex Wrenches. These top-shelf Allen wrenches come with offset handles made from durable nylon in a comfortable, ergonomic design. They are made of chrome vanadium for exceptional durability. The long shafts feature Bondhus heads for accessing hard-to-reach bolts and the short ends are chamfered for extra grip and high-torque applications.
Park’s Professional Cable And Housing Cutter is specifically for use on derailleur and brake cables and housing. It even makes quick work of hard-to-cut shift-cable housing. Its cold-forged, heat-treated-steel handles won't bend and its precision-ground jaws cut perfectly every time. Its dual-density molded grips are specially contoured for superior comfort and control. Plus, there’s a built-in cable-end crimper and a forming hole for reforming housing ends.
These shop-quality L-shaped hex wrenches have a genuine Bondhus balldriver tip on the long arm (excluding the 10mm) for hard-to-reach bolt heads and a straight tip on the short arm for high-torque applications. The HXS-1.2 includes a handy portable tool organizer/holder and it's hinged for easy access. • Includes 1.5, 2, 2.5, 3, 4, 5, 6, 8, and 10 mm sizes • Wrench tips are precision chamfered for a clean, tight fit • Made from industrial-quality Bondhus Protanium high torque steel
$10.95 - $16.95
World-famous Park Tool quality wrapped up in a combination metric wrench. Features both open and 12-point two-way ratcheting box ends. Forged from chrome vanadium steel, chrome plated, meticulously polished, then center dipped in Park Tool blue vinyl for a positive grip. Strong, comfortable, and beautiful!
Updated to fit current 12-speed cassettes, this combination chain whip and freewheel / lockring remover wrench is heat treated to prevent bending, flexing and wear and features a long, molded handle in addition to a built in hex shaped driver. - Works on 5- to 12-speed road and mountain bike cassettes and freewheels - 1-inch (25.4mm) box-end wrench fits Park Tool Freewheel / Cassette Lockring Tools - Features hardened pins to keep the chain in place
$7.49 - $9.49
Park's professional-quality, precision-sized spoke wrenches are hardened and chrome plated for long service. Wrenches are vinyl coated in one of four colors indicating the size at a glance. You will find these wrenches in virtually every professional bike shop and every shop mechanic's personal tool stash. Make sure you have the sizes you need in your home toolbox and bike bag.
• Updated to be stronger, smoother, and more versatile • Features a new material and redesigned tip for easier entry into just about any tire, including tubeless • The unique design lifts the tire away from the rim and features a spoke hook to use when multiple levers are needed • This set includes 3 tire levers
Park's Torx Wrench Set is just what you need to make repairs on many of your bike parts that use Torx (star-shaped) fittings, such as disc brakes, pedals, chainring bolts, and others. It offers the common bicycle wrench sizes (T7, T9, T10, T15, T20, T25, T27, T30 and T40) in a convenient fold-up set. Its composite handle is super strong, comfortable to use and slip resistant.
• Updated to fit better in the hand with a more rounded, smoother shape • The precision sized SW-7.2 fits the three most popular spoke nipple sizes on the market • Nickel plated for years of service • Designed for the home mechanic. FIts the following size spoke nipples: • .127" (3.23mm) • .130" (3.30mm) • .136" (3.45mm)
Park's Valve Core Tool is great for tightening, removing and installing Schrader and Presta valve cores (the cores are inside the valve), and also Presta valve extenders that have 5mm wrench flats. It's a handy tool to save a tube when all that's wrong is a broken valve, and it also lets you remove valves to easily insert sealant.
Flat, compact design is ideal for the minimalist who wants an essential set of ultra-light tools on the road or trail. - 2/3/4/5/6mm hex wrenches - T25 Torx wrench - Standard & PH1 screw drivers - 80g
The Kool-Stop Tire Bead Jack is an articulated tool, with a comfortable grip, for installing really tight tires. The articulated end uses the rigid piece against the rim edge as a fulcrum while the hinged end lifts the bead up and over the opposite edge of the rim. This is a great tool for dealing with difficult tires.
10 Weight Green Damper Fluid For rebuild and repair of Fox suspension. - 10 weight, 32oz bottle
Regular chain and component cleaning is a chore no more thanks to Finish Line's Grunge Brush. The "horseshoe" end scrubs the chain thoroughly with its compact bristles and the long bristled end provides easy cleaning of sprockets, chainrings, pedals and derailleurs. Plus, the Grunge Brush is portable enough to bring to races and weekend cycling excursions too.
$7.99 - $62.99
Finish Line Showroom Polish is made with Teflon fluoropolymer and uses DuPont Teflon Surface Protector technology. Provides a brilliant shine plus long term protection on all surfaces of a bicycle. 100% safe for all plastics, rubbers and carbon fiber parts.
Being a "shade tree mechanic" doesn't mean you should lean your bike against a tree. You paid hard-earned money for your family's bike collection and we've got a budget-conscious, yet feature-loaded bike repair stand that's perfect for the home bike mechanic. The price-point leading 360-degree rotating clamp can position your bike optimally for any work you're planning. Plus, the Recreational Stand leverages a 52-inch (132cm) wide base with rubber-coated end caps for fantastic stability on any surface. And when the service day is done, it folds into a space-saving unit for storage. Add a Tool Tray, Bottle Opener and a Pro Truing Stand for the complete at-home bike shop. - Seatpost clamp features Spinner Knob for quick closure and precision clamping pressure - 360-degree rotating clamp design provides easy access to any part of your bicycle - Fixed clamp height at 55-inch (139cm) - Rubber-coated clamp secures and protects expensive components and beautifully painted frames - Clamp opening up to 1.9-inch (4.8cm) accommodates even the largest diameter frame tubes - Powder-coated steel construction is corrosion resistant and incredibly durable - Stiff 52-inch (132cm) base and rubber-coated end caps create ultimate stability even on uneven surfaces - Total load capacity of 60lbs (27.2kg) accommodates service on most road, mountain bikes, fitness bikes, and electric bikes - Portable and compact construction creates a remarkably small folded footprint of 10 x 4 x 55-inches (25.4 x 10.2 x 139.7cm) - Optional Travel Bag available - At 13.8lbs (6.3kg), moving in and out of storage is no problem - No assembly required - 3-year Warranty
$19.99 - $20.00
The ultimate trailside companion. These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on. The m10 includes: Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8 Screwdrivers: Phillips #2, flat #2 Torx: t-25 Length: 89 mm Weight: 124g Warranty: Lifetime
The ultimate trailside companion. These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on. The m17 includes: Chain tool: 8/9/10 speed compatible Spoke wrench: #0, 1, 2, 3 Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8 Open wrench: 8mm, 10mm Screwdrivers: Phillips #2, flat #2 Torx: t-25 Length: 89 mm Weight: 168g Warranty: Lifetime
Refined functionality The Bontrager Elite Multi-Tool combines smooth style with practical design. This elegant tool features a compact design that easily packs away yet provides all of the essential tools to keep your bike tuned and running smoothly. Key features - CNC-machined keys for lightweight durability - 2,2.5,3,4,5,6, and 8 hex along with Phillips, flat and T25 - Slim profile makes it easy to pack on any ride - Ultra-light aluminum alloy design
$3.99 - $21.99
- Developed by the Boeing company for lubrication and protection of aircraft components - Dries to a thin waxy film that clings to metal for months - Law prohibits ORM-D materials from shipping by air
Keep your brakes performing at their best with Avid's DOT 5.1 Brake Fluid. They're compatible with all Avid disc brake seals. You'll get a 4-ounce bottle of fluid.
Keep your tools at hand to avoid the walk of shame. - 11 Bits included - Hex: 2, 5, 3, 4, 5, 6 - Torx: T10, T15, T20, T25, T27, T30 - Quiver holds 3 bits - Magnetic bit receptacle - JIS driver - Threaded barbs for a secure fit in bar tape and allow for a tool-free removal - Fits standard road bars - Tin box included - Weight: 75 grams (Tool bit holder, Quiver, and 3 Bits)
- Spider removal tool is compatible with all e*thirteen cranks that have a removable spider, and can also be used as an installation/removal tool for e*thirteen bottom brackets
Zipp Speed Weaponry Valve Extender Wrench Set - Two 4 mm and 5 mm combination wrenches - Replacement wrenches required to properly install Zipp integrated valve extenders - Use with Zipp Tangente tubes with aluminum Presta valve and aluminum valve extender
This adapter tool alows for installation of the crown race without damaging seals. It is compatible with the Park Tool CRS-15.2 crown race setting tube. Internal o-ring retains this adapter on the setting tube during use and storage. CNC machined from aircraft grade aluminum billet. - Fits Park Tool CRS-15.2 crown race setting tube - Design and manufactured in Minneapolis, MN USA - Material - aircraft grade aluminum
In-bike storage and essential riding tools that can meet the needs of almost any trailside repair. Durable, flexible storage sleeves make for a secure, clean place to stow EnCase System tools or other small items. Fits most mountain bars and most road bars thanks to a storage sleeve with a customizable rubber flap that can be cut to meet your handlebar inner diameter. - 14 functions (spoke wrench; valve core wrench; flat head #3.5; Phillips #2; 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, and 8mm hex; and T10, T25, and T30 Torx) - Magnets & O-rings keep all parts in place - Ball detent swivel head helps access hard-to-reach places - Handle doubles as breaker bar when ball detent swivel head is bent for extra torque - Store in handlebar with a Wolf Tooth EnCase Storage Sleeve (included) - Magnet on bottom end of tool allows for storage on steel bike stands (or refrigerators) - Fits most standard mountain handlebars and most drop bars (except ergonomic drop bars that have hard angles in the drops) - Chain & Tire Plug tool compatible with all bicycle chains including 12-speed - Inserter tool and bacon strips plug holes in tubeless tires - Five strips included; refills available - Hardened steel pin for lifetime durability - Requires 4mm hex for chain tool driver which can be found on the EnCase Hex Bit Wrench - Storage sleeves made of vibration-damping material and snug fit prevents rattling - Durable precision-machined aluminum end caps - Custom fit rubber flap can be trimmed to fit in smaller diameter bars - Bonus storage space—fits a Presta-to-Schrader adapter and valve core or a master link (both sold separately) - Includes Drop Bar Fit Kit to customize fit for larger-diameter road handlebars
EnCase System bit set contains: - Spoke wrench - Valve core wrench - Flat head bit - Phillips bit - Hex key sizes: 2, 2.5, 3, 4, 5, 6, 8 mm - Torx compatible sizes: T10, T25, T30
Fix tubeless tire punctures and broken chains. This multi-tool has a chain tool on one end and a tire plug built into the handle, with inner storage for tubeless tire plugs. The full multi-tool was designed for use with an EnCase System Storage Sleeve, which fits inside bar ends of your handlebars. Ride with this multi-tool in a storage sleeve or in a tool wrap for easy repairs while riding. - Compatible with all bicycle chains, including 12-speed - Inserter tool and bacon strips plug holes in tubeless tires - Five bacon strip tire plugs included; refills available - Hardened steel chain pin driver for lifetime durability - Store in handlebar with a Wolf Tooth EnCase Storage Sleeve (sold separately) or carry in a jersey pocket - Chain tool driver requires 4mm hex (available on EnCase System Hex Bit Wrench) - Fits most standard mountain handlebars and most drop bars (except ergonomic drop bars that have hard angles in the drops)
Page 1 of 12 Next page