Write a Review
$18.00
Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant.
Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads:
- MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi
- ERD 615, 622x49.9, 29 in x 52.3mm
Your rim has a stepped valve and is not compatible with this Schrader valve.
$21.99
• 5mm skewer set (F+R hubs)
• Standard 5mm Hex release
• Black or Silver anodized finish
• Chromoly axles
$49.99
Upgrade or refresh your bike.
GENUINE REPLACEMENT PARTS
When it's time to refresh your trusty bike, Trek Genuine Replacement Parts have you covered.
PRODUCT DETAILS
- Original equipment replacement wheels for the Trek Kickster
- Does not include reflector, rim strip, valve, or owner's manual
$81.80 - $99.99
Ratchet freehub bodies have a gloss finish and don't have a seal, as this is fixed on the hub shell. The Ratchet System was the first of this type for DT Swiss; used in the mid-range products like the 350 hubs.
- End Cap Included
$109.99
Best value in quick-release disc wheels.
$150.00
CushCore is an engineered foam insert to be mounted inside a tire, designed to absorb impacts, reduce vibration, and increase lateral stability. These characteristics translate to a more controlled, comfortable, and faster ride. - The system is designed to be used with tubeless-ready or tubeless converted rims and tires and is compatible with tubeless tire sealants - A specially designed tubeless air valve is included with each insert; allowing air to move through the valve without becoming obstructed by the insert - The insert divides the inner volume of the tire in half, maintaining air underneath the tread and the foam insert next to the rim - Fits tire widths 2.1 – 2.6" and rims with internal width 22 – 35mm Includes: - 2 CushCore Inserts - 2 CushCore Tubeless Air Valves - 4 Rim Stickers - Installation Instructions
$189.99
Get back on the bike with a genuine replacement wheel.
When it's time to refresh your trusty bike, Trek genuine replacement wheels have you covered.
PRODUCT DETAILS
- Original equipment replacement Bontrager Paradigm TLR 32H Hole wheel
- Lightweight alloy rim (26mm outer, 21mm inner width)
- Centerlock disc brake hub
- Optimize with Bontrager TLR Sealant, TLR rim strips, valve stems, and tires
- Does not include skewer, reflector, rim strip, valve, or owner's manual
- Wheels shipped as photographed
$255.90 - $256.00
Your entire focus lies on the right line choice, the exact braking point and the spot-on steering movement. All the everyday stress fades away, you feel free and only hear the precise sound of the freehub system. The E 1900 Spline wheels were developed precisely for these freewheeling moments. A proven aluminum rim and hand-laced steel spokes provide the reliability required from an Enduro wheel.
- Intended use = All-Mountain/Trail, Enduro and Freeride
- Tubeless ready, 30mm wide and light rim
- Straight-pull hubs/spokes built with a 3-cross pattern
- Includes Tubeless Valve and Tape, 6-bolt adapter with lockring
$259.99
- Elite Series convertible fat bike hubs
- Available in multiple axle configurations
- Shimano and XD cassette body options with 6 pawl/54 point/6.6° engagement
- J-bend spoke compatible
- 6 bolt disc brake rotor compatible
- Sealed bearings
- Material: AL6061
- Color: Blk
- Brake Type: 6B
- PCD-L: 58mm
- PCD-R: 58mm
Quick-Release:
- LTF-L: 48.65mm
- LTF-R: 48.65mm
- CTF-L: 36.5mm
- CTF-R: 36.5mm
12mm Thru-Axle:
- LTF-L: 52.15mm
- LTF-R: 52.15mm
- CTF-L: 46.5mm
- CTF-R: 46.5mm
$279.99 - $294.99
A durable road wheel with a 25mm inner width perfect for higher-volume road and gravel tires.
A wider rim for a better ride
The Paradigm Comp 25 road wheel adds traction, speed, confidence, and comfort to your ride, with a wider internal rim width that lets you run lower pressure for better tire support.
Product details
- 25mm inner rim width (30mm outer) offers added tire support to better suit larger-volume road and gravel tires
- Rapid Drive 54 road hubs provide quick engagement for faster acceleration and increased control
- Offset spoke bed reduces wheel dish for stiff and stable performance
- Tubeless Ready (TLR) rims allow for quick transition to tubeless system
- 23mm rim depth with 24 hole front/rear and DT Aerolite spokes
- Centerlock disc with 12mm thru-axle and end caps available for 15mm conversion
- Includes TLR rim strip and TLR valve for simple tubeless setup
- No rider weight limit
$389.95
Proterra Tough i30 wheels keep the trail in check while everything else blurs by in the periphery. Reinforced by our proven Dual I-Beam support, Proterra Tough rims feature a 30mm internal width to provide higher tire volume while also increasing sidewall support at lower pressures. High-quality EZO sealed bearings are designed to endure through seasons of aggressive riding, while a responsive 6-pawl freehub provides the snappy 3.7 degrees of engagement you demand when cranking out of corners. Choose Proterra Tough when you need a wheel that won't let you down.
- 30mm inner rim width with 32 spokes laced in a 3-cross pattern
- 6069 aluminum alloy rim is TCS 2.0 tubeless-ready
- Sapim Secure Lock 14-gauge brass nipples provide bomber durability, while double butted 2.0/1.8/2.0mm J-bend spokes make replacement a breeze.
- Tubeless tape, Solid Strip, and black alloy valves are preinstalled, making the wheels ready for tubeless tires the moment they arrive on your doorstep. The TCS 2.0 Solid Strip is a durable strip that lies beneath the tape, prevents it from sagging at the spoke holes, makes it easier to mount a tire, and protects from puncture in the case of a broken spoke.
- 6-bolt rotor mounts
- Top-tier EZO sealed bearings
Page 1 of 1