Other
Cartridges fully replace the functional mechanism of KS dropper posts. Pick the model and length of drop for the post you need to service. These are also called "Oil Pressure Sticks" and "Air Pressure Sticks" In KS Service Documentation.
- Fully replace the functional mechanism of KS dropper posts
- May not work with OEM dropper posts
$0.16
Parts for repair and maintenance of DT Swiss hubs.
- DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings
$0.40
Hope Pad Clip
- Fits Tech and Tech Evo M4, X2, and V2 Brakes
$0.90
Replacement small parts for Hope disc brake Hope disc brake calipers.
$0.99
Internally fitting service parts for Hayes hydraulic disc brake master cylinders.
- All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).
$1.00
Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.
$1.50
• Designed to keep dust and dirt out of V-Brake cable/housing systems
$1.50
KMC 3/16" Master Link Chain Links
- For 3/16" chain, extra wide
- Extra-wide, for non-derailleur bikes: BMX, cruisers, etc
- Perfectly fits on KMC 415H & 415H-NP chains
$1.65
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension
- Uses standard chain pin connector and tool
$1.99
HFX-Mag/-9, El Camino, Stroker Caliper-Hose Connection Seal
$1.99
Trek proprietary frame hardware.
- Trek MTB Cable Stops and Guides
- For specific compatibility concerns, please contact our Customer Service team
$2.00
FSA Mega Exo Small Parts.
$2.00
This is a replacement Brake Hose Cover for the Lever End of Shimano BH90-SBM, BH90-SB levers.
- Covers brake hose fitting at the brake lever
$2.00
- Replacement retaining clip for the Surly Tuggnut/Snuggnut
$2.50
Replacement piston and seals for Hope disc brake calipers.
$2.50
Replacement piston and seals for Hope disc brake calipers.
$2.50
Use to create your desired chain length in single-speed applications. Only one half link is needed.
- Non-reusable
- Width: 9.4 mm
- Drivetrain Speeds: 1
- Color: Black
- Chain Compatibility: Shimano , SRAM , Campagnolo , Connex , KMC
$2.50
The Gyro G3 upper top plate is designed for use with the G3 detangler.
$2.99
Air Spring Volume Reduction Kit
- Cane Creel Kitsuma Air 1250^3 Negative Volume Reducer
$2.99
M5 bolts to mount your flat mount caliper to the frame. Sold as a QTY of 2.
$3.00
FSA Mega Exo Small Parts.
$3.00
FSA Standard Headset Bearings
$3.00
Internal components for servicing the Reverb and Reverb Stealth mechanism.
$3.00
Shimano Mountain Deore XT M8000 Shift Pod Cable Adjusting Unit
$3.00
Shimano E-tube Dummy Plugs
- Extra E-Tube plugs for sealing unused ports on shifters or junction boxes
- Sold each
$3.26
Parts for the service of the seal and restore the smooth cycling of KS dropper posts.
$3.40
Parts for repair and maintenance of DT Swiss hubs.
- DT Swiss Spacer Sleeve - 10.1mm, for 3-pawl
$3.40
Parts for repair and maintenance of DT Swiss hubs.
- DT Swiss Star Ratchet Spring
$3.41
Flat head screws from Wheels Manufacturing.
$3.41
Bulk packaged, corrosion resistant stainless steel fasteners.
$3.41
Flat head screws from Wheels Manufacturing.
$3.41
Flat head screws from Wheels Manufacturing.
$3.47
Campagnolo Miscellaneous Rear Derailleur Parts, Derailleur Bolt Bushing
$3.50
Replacement end plugs for the GA2, GA2 Fat, and GA3 grip models.
- One size.
- Sold as a pair.
- Fits Ergon GA2, GA2 Fat and GA3 models only.
- Designed to fit Trail / All-Mountain MTB handlebars on the market today.
$3.50
Replacement right and left Ergon logo bar plugs. Features the Ergon logo in a vibrant white color. You have the choice of a plug set of the barend and non-barend models
- Right and Left soft plastic bar plugs.
- Sold as a set only.
- Fits most handlebars.
- Can be trimmed to fit various handlebar thicknesses.
- Plug set for GP and GS grips with barends - fits GP2, GP3, GP4, GP5, GS2 and GS3 models only
- Plug set for GP1, GC1 and GS1 grips - fits GP1, GC1, and GS1 only
$3.57
Complete remotes and remote components for KS dropper posts.
$3.57
Parts for the service of the seal and restore the smooth cycling of KS dropper posts.
$3.68
Campagnolo small parts for bottom brackets.
$3.94
Aluminum headset stack spacers precision cut to ensure proper headset function.
- Precision cut for proper function
$3.94
Aluminum headset stack spacers precision cut to ensure proper headset function.
- Precision cut for proper function
$3.94
Aluminum headset stack spacers precision cut to ensure proper headset function.
- Precision cut for proper function
$3.95
Bolts, clamps and washers for Thomson Seatposts and Seat Clamps.
- Sold individually, includes bolt, washer and nut
$3.95
The Tanpan ferrule converts standard Tanpans to Tanpan inlines.
- Coverts Tanpan into Tanpan Inline
$3.99 - $20.00
Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right.
- Made from Aluminum, anodized or polished finish, without logos
- 1-1/8" Diameter
- S.H.I.S. Stem Clamp Diameter: 28.6mm
Page 1 of 25
Next page