This beauty here was designed alongside Surly's Midnight Special frame. In an effort to shed a few grams (it's for a road bike after all), they opted to utilize a unicrown design rather than a lugged one. In addition to the weight savings, it also looks really nice — don't you think? Like the Midnight Special frame, this fork is equipped with modern road standards like flat mount disc brakes and a 12 x 100mm thru-axle. For increased versatility, it has braze-ons for fenders and racks (including mid-blade!). - 100% CroMoly construction, fully brazed crown - Mid-blade thru-blade eyelets - Rack and fender eyelets at the dropout - 12 x 100mm thru-axle - Clearance for 27.5 x 2.32 or 700c x 42mm tires
$116.00 - $130.00
Surly's Moonlander Fork has clearance for a 26 x 4.7-inch wide tire. It accepts specialty front hubs with a rear disc offset or 135mm rear hubs. It takes a front disc-brake adapter so you can run any brakes that come in a traditional front/rear set without having to break up a set. This fork features large-diameter, thin-wall chromoly blades that taper for a smooth and supple ride. And, it's got standard and low-rider rack mounts and comes in a tough powdercoat finish because it's awesome.
Designed with the Surly Pack Rat frame, this fork is built with front cargo carrying in mind. It’s made from 4130 CroMoly steel and features mid-blade eyelets for mounting a Surly 8- or 24-pack rack (among others). This lugged and brazed fork also includes fender eyelets at the dropouts, internal routing for generator hubs, and cantilever brake pivots. - 100% CroMoly construction, fully brazed crown - Mid-blade thru-blade eyelets for mounting a front rack - Fender eyelets at the dropout - Internal routing for generator hubs - Cantilever/Linear Pull brake mounts - 9mm x 100mm quick-release dropouts - Max tire clearance: 26 x 2.0"
Designed with the Surly Pack Rat frame, this fork is built with front cargo caryying in mind. It’s made from 4130 CroMoly steel and features mid-blade eyelets for mounting a Surly 8- or 24-pack rack (among others). This lugged and brazed fork also includes fender eyelets at the dropouts, internal routing for generator hubs, and cantilever brake pivots. - 100% CroMoly construction, fully brazed crown - Mid-blade thru-blade eyelets for mounting a front rack - Fender eyelets at the dropout - Internal routing for generator hubs - Cantilever/Linear Pull brake mounts - 9mm x 100mm quick-release dropouts - Max tire clearance: 650B x 48c
Much like its frame counterpart, the Pugsley Fork is ready to get as far off the beaten path as possible. It’ll accept 26? tires up to 4.3” and requires an offset-built wheel to match the Pugsley frame (17.5mm). We space the dropouts at 135mm, which is a useful feature, especially in remote places and extreme temperatures/conditions. Should your freehub seize due to cold, invasive grit or other reasons, you can swap wheels and keep moving. The fork has internally-butted, tapered straight legs. 51mm IS disc brake caliper mount uses standard front adapter. Specifications: - Axle-to-crown: 447mm - Offset: 43mm - Steerer: 260mm, 1-1/8" straight - Tire Clearance: 26” x 4.3" (on rims up to 82mm wide)
This fork will accept 26-inch tires up to 3.8-inch with plenty of clearance, even using rims as wide as 82mm. It requires a wheel built offset to match the Pugsly frame (17.5mm). Since the hub spacing is 135mm (mountain rear) this is a useful feature, especially in remote places and extreme temperatures or conditions. Should your freehub seize due to cold, invasive grit or other reasons, you can swap wheels and keep moving. Internally butted tapered straight legs. 51mm I.S. disc brake caliper mount uses standard front adapter. Chromoly. - Axle-To-Crown: 447mm - Offset: 43mm - Steerer: 260mm 1-1/8" straight - Tire Clearance: 26 x 3.8" (on rims up to 82mm wide)
Surly's Steamroller Fork pairs great handling with urban utility. It has steep track geometry for lightening fast response, making it as at home on the velodrome as it is flying downtown with cars and pedestrians. It features a flat crown, drilled to accept a standard-reach caliper brake, and the use of wide 38mm tires. And its stealthy Black powdercoat means your opponents in the Pursuit race will never see you coming!
$125.00 - $135.00
Replacement disc compatible forks for the Surly Straggler. - Tire Clearance: 50mm (w/o fender) - Weight: 2.4 lb (1.1kg) uncut - Axle-to-crown: 380mm - Offset: 44mm - Steerer: 360mm, 1-1/8" straight
The Straggler fork is very much like the Cross-Check fork — t's a lugged and brazed CroMoly fork with room for 700c tires up to 50mm wide. Both feature fender and rack mount eyelets at the dropouts, mid-blade threaded rack mounts and threaded eyelets on the sides of the crown for accessories. Both deliver a resilient ride and are finished in black powdercoat. The Straggler fork is equipped with a 51mm I.S. disc caliper mount and no accommodation for rim brakes. - Axle-to-crown: 400mm - Offset: 44mm - Steerer: 300mm, 1-1/8" straight (42-58cm), 350mm, 1-1/8" straight (60-62cm) - Tire Clearance: 50mm (w/o fender) Weight: 2.5 lb (1.15kg) uncut
The Troll Fork is just like the one that comes with the Troll frame, a 26-inch wheeled fully geared utility bruiser and cruiser. Like all Surly's forks, it's constructed of CroMoly steel. It sports removable rim brake pivots as well as a 51mm disc caliper mount. The Troll Fork is designed to accept a rack while using a disc brake, via through-blade threaded mounts in two places on each fork blade, and it's even got fender eyelets. - Disc or rim brake compatible - Compatible with disc brakes and rack simultaneously - Fits 26-inch wheels with clearance for a 3.0-inch tire - Steerer Type: Straight 1-1/8-inch - Sleek powdercoat finish
Surly's Wednesday fork is made of the same 4130 CroMoly steel as its frame counterpart. It's ready for trail use and features butted and tapered blades with thru-axle dropouts spaced at 150mm. It features many accessory barnacles (or braze-ons if you prefer to speak in “official" terms) like barrel bosses at the dropouts and crown, mid-blade thru-blade eyelets and triple bottle bosses on both fork legs. - Axle-to-crown: 468mm - Offset: 47mm - Steerer: 260mm, 1-1/8-inch straight - Tire Clearance: 26 x 5.25-inch - Weight: 1262g
The Hurricane features P² Post Production heat-treatment for superior strength. Our one-piece, spiral-fluted (Vortex) steerer reduces weight without decreasing strength. The 31.6/1.4/1.1mm tapered legs are fluted as well, making these the strongest forks we've made to date. Top it off with our new, investment-cast 6mm-thick dropouts and you've got a fork you can trust to hold up to any style of riding. Vortex top cap included. - Height: 314mm - Steerer Tube Length: 172mm - Bearing Race: Machined/Integrated - Offset: 28mm - Compression Bolt: 24 x 1.5mm - Compression Bolt Tool: 6mm allen key - Colors: Matte Black - Weight: 36.2-ounces
Lighten the mood with Specialized's Chisel Carbon Fatboy Rigid Fork. The uni-directional full carbon monocoque structure with carbon legs, crown, and steerer is featherweight. It's got a 160mm post mount for brakes, an integrated aluminum crown race, and aluminum dropouts that are compatible with 135mm hub and SBC OS28 end-caps for increased stiffness.
The Ohlins RXF 36 Coil fork uses the same chassis of the RXF 36 fork, keeping the same stiffness, room for bigger tires, and proprietary TTX damping technology, but instead uses high quality coil springs that are easily swapped for various rider weights and it utilizes. This provides a ride with great feel throughout the travel—from small bumps to big hits. - Features a coil spring, with multiple spring rates in 0.9N/mm / 5lb/inch increments, allowing for a plush, linear suspension feel, tuned specific for the riders weight. - TTX (Twin Tube) damping enables separated oil flow, so the fork will always provide the perfect degree of pressure. This way, it stays smooth and high in the travel without compromising bump absorption, traction, or stability. - A tapered alloy steerer and two piece crown ensure high stiffness and tire control with less chassis flex and chassis hysteresis. 36mm stanchions with 51mm offset for party time on the trail. - 150 and 160mm travel options available. - 110 x 15mm spacing makes it compatible with most 29-inch setups.
Sure, there are plenty of lightweight XC forks out there, but racing demands so much more. Nimble handling, gram-obsessed weight, buttery damping—combined, they all make the difference between a good fork and a great fork. And with this in mind, the all-new RockShox SID World Cup Brain fork has been completely redesigned to meet the demands of XC racing, and hyperbole aside, we can confidently say that it sets the bar for race-worthy performance. The all-new Brain damper uses position sensitive technology for better chassis balance and traction. It does this while retaining the ability to separate rider input from bump events on the trail—just some of the incredible stuff that Brain is known for. The new technology can now remain active during the initial 25mm of travel, and this creates a much more balanced riding position and supple front-end feel. In turn, this goes a long way in reducing rider fatigue. And although the fork feels more active initially, as soon as you standup to get on the gas, the forward shift in weight naturally compresses the fork into the platform. So yeah, you'll feel well supported and efficient during hard sprint efforts. Incredibly, Brain does all this while keeping you in control and riding smooth on rough terrain without any need for extra cables and lockout levers on the handlebars. The World Cup Brain edition of the SID is not just a slight upgrade over the RLC and XX models, either. Along with the integrated Brain technology, it utilizes a carbon fiber steerer and crown, which reduce weight by over 100 grams and increases the overall stiffness. Also adding to the stiffness of is the short-travel-specific design. Leaving the 120-millimeter segment to the trail category, RockShox’s engineers were able to focus on the 80- to 100-millimeter travel range, and therefore develop lighter and stiffer uppers and air shafts. This new design, along with SRAM's Torque Caps (they create an enhanced interface between the hub and fork dropout), Power Bulge technology that reinforces the lowers, and 110-millimeter Boost spacing, keeps torsional stiffness high, allowing you to point-and-shoot while descending. Last, but certainly not least, on the feature spec is the Solo Air spring that’s customizable with RockShox’s Bottomless Tokens. The Solo Air spring lets you adjust pressure with a single Schrader valve that controls the pressure in both the positive and negative air chambers, making adjustments to pressure simple and intuitive. To customize ramp-up preference, RockShox’s Bottomless Tokens can be added to create a suspension curve that’s custom to your preferences. - Tapered Full Carbon Steerer tube - Top-adjust Brain damper w/ Position Sensitive technology - 110mm spacing with Torque Cap compatibility - 100mm of travel
Salsa Cro Moto Grande Fork 29". - Disc only 29" rigid fork - Suspension corrected for 80mm travel fork - Maxle Included - Axle to Crown Length: 483 mm - Brake Mount (Fork): IS Disc Brake 160 - Crown Race: 40 - Front Axle: 15mm Thru x 100mm - Material: Chromoly Steel - Offset: 45 mm - Wheel Mount Center Offset (mm): 0 - Steerer Tube Length (mm): 260 mm - Weight: 1080 g
Looking to go rigid? Then check out Salsa's 80mm suspension-corrected CroMoto Grande mountain bike fork. This chromoly beauty boasts ISO disc tabs for premium braking and it's 1-1/8" straight steerer lets you use it on older frames, or brand-spanking-new ones. It features Salsa's famous, forward-facing stainless steel fork ends and has room for tires up to 90mm wide. Plus, it comes with fender eyelets so you can stay clean even when it's sloppy out. - Salsa Classico CroMoly - Forward-facing, stainless steel dropouts - 1-1/8? threadless steerer (260mm) - 468mm axle-to-crown - 45mm rake - ISO disc tabs - Tire clearance = 90mm - Fender eyelets -1080g with full-length steerer tube
The Cutthroat carbon fork is full of features, ready for any adventure. - Full Carbon fork, tapered steerer - Fits 29 x 3.0" tires - Three-Pack mounts - Crown light mount - Includes Salsa Deadbolt Ultralight Thru-Axle - Axle to Crown Length: 483mm - Brake Mount (Fork): Flat Mount 160mm - Color: Matte Black - Crown Race: 40mm - Defined Color: Black - Front Axle: 15mm Thru x 110mm - Material: Carbon - Offset: 51mm - S.H.I.S. Stem Clamp Diameter: 28.6mm - Steerer Type: Tapered - Steerer Tube Length (mm): 350mm - Weight: 730g - Wheel Size: 29" , 29+ - Max Rotor Size (Fork): 180mm - Maximum Tire Clearance (Fork): 77mm
The Cutthroat carbon fork is full of features, ready for any adventure. - Full Carbon fork, tapered steerer - Fits 29 x 3.0" tires - Three-Pack mounts - Crown light mount - Axle to Crown Length: 483 mm - Brake Mount (Fork): Post Mount 160 - Crown Race: 40 - Front Axle: 15mm Thru x 100mm - Wheel Mount Center Offset (mm): 0 - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Type: Tapered - Steerer Tube Length (mm): 260 mm - Wheel Size: 27.5+ , 29" , 29+ - Rotor Size (Fork): 200 - Maximum Tire Clearance (Fork): 3
The Firestarter Carbon Fork is Salsa's high-end, rigid bikepacking fork. This sure-tracking platform features a carbon structure and 15mm thru-axle design, and the Three-Pack mounts on the forward portion of each leg allow use of Salsa Anything Cages or extra water bottle cages. - Axle to Crown Length: 483 mm - Brake Mount (Fork): Post Mount 160 - Crown Race: 40 - Front Axle: 15mm Thru x 100mm - Wheel Mount Center Offset (mm): 0 - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Type: Tapered - Steerer Tube Length (mm): 260 mm - Weight: 620 g - Wheel Size: 29er, 29+, 700c - Rotor Size (Fork): 200 - Maximum Tire Clearance (Fork): 3
Salsa Firestarter Fork - Mid-blade and dropout rack mounts - Anything Cage mounts on front of fork - Axle to Crown Length: 483 mm - Brake Mount (Fork): IS Disc Brake 160 - Crown Race: 30 - Front Axle: 9mm x 100mm - Material: Steel - Wheel Mount Center Offset (mm): 0 - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Type: Straight - Steerer Tube Length (mm): 300 mm - Weight: 1190 g - Wheel Size: 27.5+ , 29" , 700c - Maximum Tire Clearance (Fork): 3
The Makwa fork is Salsa's fat bike race fork. Lightweight and stripped of extras, its thru-axle design boosts stiffness and aids in solid tracking on the trail. This fork is spec’d on Salsa's 2014 Beargrease bikes, and is also fully compatible with their 2014 Mukluk frames. - Axle-to-Crown Length: 483mm - Brake Type: Disc - Brake Usage F/R: Front - Color: Black - S.H.I.S. Crown Race Diameter: 40 - Fork Rake: 51mm - Front Axle Type: 15mm thru - Front Axle Size: 15 x 171L, TP=1.5, TL=10 - Front Hub Spacing: 142mm - Material: Carbon - S.H.I.S. Clamp Diameter: 28.6 - Steerer Tube Length: 260mm - Steerer Type: Tapered - Weight: 720g - Compatible with all 26 x 4.0–5.0" tires and 29+ tires
The Waxwing Deluxe fork is designed to thrive on gravel. Its carbon-fiber construction is lightweight and soaks up micro-impacts on rough roads. The 12 x 100mm thru-axle keeps Waxwing stiff for steady tracking and responsiveness when dodging ruts, potholes, and road debris really matters. Waxwing Deluxe is compatible with both 700c and 650B wheels so you run your preferred size. Three-Pack mounts, mid-blade low-rider rack mounts, fender mounts, and internal dynamo hub cable routing add form and function. The Waxwing Deluxe fork is standard equipment on the 2019–2020 Warbird, and is available in a version painted to match the Warbird frameset. - Thru-Axle included - Axle-to-Crown Length: 405mm - Brake Type: Disc, flat mount, 160mm maximum rotor size, 42mm bolt length - Color: Black - S.H.I.S. Crown Race: 40mm, 36°, integrated crown race - Fork Rake: 50mm - Front Axle Type: 12mm thru-axle - Front Axle Size: 12 x 120mm, TP = 1.5, TL= 12mm - Front Hub Spacing: 100mm - Material: High-modulus carbon fiber - S.H.I.S. Clamp Diameter: 28.6mm - Steerer Tube Length: 350mm - Steerer Type: 1-1/8" to 1-1/2" tapered - Weight: 520g - Max tire size: 700c x 45mm or 650B x 51mm
$349.00 - $369.00
Light (actually, very light)? Check. Easy to set up? Check. RockShox ride quality? Check. Too good to be true? Not if you are referring to the RockShox 30 Gold, featuring Motion Control damping. - Motion Control damping featuring low speed compression adjustment to lockout - Fast Black aluminum upper tubes - Solo Air spring
Light (actually, very light)? Check. Easy to set up? Check. RockShox ride quality? Check. Too good to be true? Not if you are referring to the RockShox 30 Gold, featuring Motion Control damping. - Motion Control damping featuring low speed compression adjustment to lockout - Fast Black aluminum upper tubes - Solo Air spring - Includes remote
With bigger bikes there comes bigger demands. Thankfully, we created the 35 Gold to meet all of them, both in performance and value. Whether you have an E-MTB or MTB, the burly 35 Gold checks the box with our proven DebonAir spring and Motion Control damping. And new this year is an E-MTB-focused option with mounting points for optional full or short fenders. All told, you might wonder how we packed so much quality and performance into such a wallet-friendly package. Features - New E-MTB endorsement options with fender mounts are appropriate for all E-bikes (1.8" taper available) - New graphics are easy to read and make a fresh impact - Motion Control damping featuring low-speed compression adjustment to lockout - Highly tunable DebonAir spring offers a consistent feel throughout the travel - Fits Tires up to 2.8" (without fenders; the use of a full fender will reduce tire clearance) - Fast Black finished 35mm aluminum upper tubes couple stiffness and lightweight with a premium look - Offset: 44mm
Now you can update your 2010+ BoXXer Race, Team, RC, R2C2 and World Cup with the Charger Damper Upgrade Kit. The Charger is RockShox’s insanely refined damper, and its sealed construction with an expandable rubber bladder ensures damping consistency, reduces vibration, and is almost 100 grams lighter than the previous BoXXer damper. Adjustment is easy and intuitive, with a single compression adjuster and a beginning stroke rebound adjuster with a factory set Rapid Recovery tune. The internal shim stacks can be re-tuned for light or firm compression and rebound settings. Includes damper, syringe, and suspension fluid.
Upgrade your BoXXer with RockShox's Solo Air spring with revised spring curve and air spring tunability with Bottomless Tokens (4 included in package). This kit is compatible with BoXXer World Cup forks from 2011 to 2014 (serial number later than 16T11XXXXXXX).
More than 20 years ago, BoXXer changed the DH world when it hit the scene. Featuring Charger 2.1 damper for unrivaled control between the tape. Ultra-low friction SKF wiper seals and race-proven Maxima Plush damping fluid all work overtime to reduce friction, noise, and provide lasting fork performance all the way to the finish corral. - Completely re-designed to reduce hand fatigue and fight unwanted friction, the Charger 2.1 damper increases confidence and control over every trail - Charger 2.1 RC2 damper featuring independent high- and low-speed compression adjust - Highly tunable DH-specific DebonAir spring offers a coil-like consistent feel throughout the travel - Ultra-low friction SKF wiper seals provide long-lasting fork performance and improve overall suspension feel - Maxima Plush damping fluid reduces friction and silences damper noise - Ultimate foil graphics package
- Slides over upper fork legs to prevent frame/fork contact - Works on 35mm boXXers only