Bottom Brackets

• Fits BB92, BB89.5 and BB86.5 frames • Easily serviced, replaceable sealed bearings and external labyrinth seal • Cups pressed in and held in place by a screw in centre tube stopping any movement or play usually found in press-fit frames • Compatible with any 24mm axle cranks • Requires Hope PressFit BB tool for installation (sold separately) • Available with either stainless steel or ceramic bearings

- Road sets include bearings, shields, c-clips and wavy washer for bearing retention/tension - Mountain sets include bearings, shields, c-clips and spacer - Choose ceramic or stainless steel options

The Revolver bottom bracket features two sealed bearings and 6061 Alloy CNC machined cone spacers with weight-saving tear-drop slots. - Precision sealed bearings - Swaged waist tube spacer for 73mm BB shells - Spindle size: 19mm or 22mm - Shell Size: Mid - Tube Spacer: Swaged waist with 5mm spacer - Spacers: 2.5mm alloy (x4) - Weight: 4.0-ounce

A variant of the external bottom bracket, PressFit cut weight by up to 40 grams and provide easier installation by allowing you to press the bearing cups into the frame instead of threading them. There's no change to the crank — spindle length and diameter remain the same. - BB Shell Width (mm): 104.5 mm , 107 mm

Surly OD Bottom Brackets - Compatible with 24mm spindles - Moonlander BB fits a 100mm bottom bracket shell, but exterior width conforms to BB121 standard

Surly OD Bottom Brackets - PF cups are 41mm in diameter - Bearing I.D. is 24mm - OD bottom bracket comes with telescoping center sleeve for added durability - High quality double labyrinth sealed stainless Enduro bearings with corrosion resistant coating - 3 additional 1mm spacers are provided to help with chain line and crank arm clearance

This FSA MegaExo bottom bracket is for use MTB MegaExo cranksets with 24mm spindles. - Sealed bearings - Die-cast then CNC machined alloy bearing cups - Composite Di2-compatible adjustable center sleeve

The new SRAM DUB crank standard, built on a 28.99mm spindle, allows for a more contamination-resistant BB design while retaining the ultra-efficient & long-lasting qualities CeramicSpeed Bottom Brackets are known for. With an integrated dust cover for all models, the snug & secure fit not only fully protects the face of the bearing, but also delivers exceptional performance without any sacrifices. CeramicSpeed hand-built bearings carry the load from crank to frame with unparalleled durability & efficiency. The SRAM DUB crank spindle requires the bearing contact points to be in a set and designated width, and all CeramicSpeed bottom Bracket options perfectly match the bearing placement on the crank spindle with the required frame interface for nearly any model of bike. Without the use of unnecessary adapters or spacers, a quiet & stable platform is ensured throughout the life of the product. The PF30 for SRAM DUB Road comes in two versions. One version uses our low-drag, long-life Standard Bearing with hardened-steel races and our super-round CeramicSpeed balls. The second version uses our Coated Bearing, which uses those same balls installed on coated, hardened-steel races for longer life and less bearing drag. Compatible with: - Frame: PF30 - Opening diameter: 46mm - Shell width: 68mm In the box: - 2 cups with CeramicSpeed Bearings installed - 2 dust covers - Spacer-tube - 4 x 1mm spacers - 10ml syringe of CeramicSpeed All Round Grease - Sticker sheet

The new SRAM DUB bottom bracket series has a simple job: connect your crankarms and protect the smooth, long-lasting application of power to your drivetrain. To allow that singular focus, we've engineered the DUB spindle to be the one true unifying component. One oversized spindle to work across every bottom bracket standard. For better crankarm compatibility. For better protection from the elements. For longer-lasting performance. To be stronger, smoother, simpler. Now, back to the ride. - One oversized spindle to work across every bottom bracket standard - Greater bearing durability

The new SRAM DUB bottom bracket series has a simple job: connect your crankarms and protect the smooth, long-lasting application of power to your drivetrain. To allow that singular focus, we've engineered the DUB spindle to be the one true unifying component. One oversized spindle to work across every bottom bracket standard. For better crankarm compatibility. For better protection from the elements. For longer-lasting performance. To be stronger, smoother, simpler. Now, back to the ride. - One oversized spindle to work across every bottom bracket standard. - Significantly lighter than PFGXP system - Easier installation by allowing you to press the bearing cups into the frame

Running a conventional threaded bottom bracket on your BB30 or PF30 frame doesn't have to be complicated. This press-fit adapter from FSA goes in snug and opens up a lot of crankset possibilities for your BB30/PF30 frame. - Aluminum - Allows conventional threaded bottom brackets to be installed in a BB30 or PF30 frame - Install with headset press (not included) and green Loctite (included)

FSA PowerPro JIS Cartridge Bottom Brackets. - Includes bolts - Spindle Interface Type: Square Taper JIS - BB Shell Width (mm): 68 - BB/Frame Interface: English

Chris King ThreadFit 24 bottom brackets are designed and built to be durable, serviceable, and silent. Bearings can be serviced with the Chris King Grease injector tool. - King made-in-house bearings - 5-year warranty - Included Fit Kit #4 is designed to mate the ThreadFit 24 bottom bracket with a 24mm spindle - Spindle Interface Type: Shimano Hollowtech II - BB Shell Width (mm): 68 , 73 - Bottom Bracket Shell I.D.: 1.37 - BB/Frame Interface: English

A tough bottom bracket that will go as hard as you. The PowerSpline has a heat-treated chromoly 12 spline spindle to make sure it can go the distance with even the most demanding riders. SPECIFICATIONS: - BB-FRAME INTERFACE: English/BSA 68E/73mm, English/BSA 68mm, English/BSA 73mm - CHAINLINE: 46.0mm, 48.5mm, 51.0mm, n/a - SPINDLE LENGTH: 108mm Spindle, 113mm Spindle, 118mm Spindle - SUPPORT E-TYPE FD: n/a, Yes - CRANK-BB INTERFACE: Power Spline - BEARING TYPE: n/a - SPINDLE DIAMETER: n/a - CUP MATERIAL: n/a - WEIGHT (G): 363 - WEIGHT BASED ON: BSA 73mm, 113mm spindle

- Ceramic bottom bracket for DUB spindle cranks Specs: - BB Shell Type: BB30 - BB Shell Width: 68/73mm - BB Bearing: Ceramic - Crank Spindle Diameter: 28.99mm - Interface: DUB - Cup Diameter: 42mm

External English (BSA) threaded road bottom bracket for 68mm shells. Wheels Mfg uses only Enduro bearings and silicone seals for the most durable and smoothest bottom brackets available. Fully serviceable. Includes: (2) - Enduro Silicone dust seals (1) - 2.5mm aluminum BB cup spacer (2) - 0.5mm crank spindle spacers (2) - 1.0mm crank spindle spacers Direct replacement for SRAM/Truvativ GXP bottom brackets! - Bearings: Enduro Angular Contact - Color: Gray - Bottom Bracket/Frame Interface: ISO/English or BSA Threaded (1.37 in x 24 TPI) - Bottom Bracket Shell Width (mm): 68mm - Bottom Bracket Shell I.D.: 33.6-33.9 mm - Crank Spindle Type: GXP (SRAM, Truvativ, Etc.) - Crank Spindle Diameter: 22/24mm - Weight: 111g

There's precious little that's better than a fresh bottom bracket. This complete FSA BB30 Bottom Bracket contains 2 stainless steel bearings, 2 C-Clips, 2 dust covers, and 1 adjustment washer.

Bottom brackets from FSA for non-threaded applications. - 24mm spindle compatibility - Stainless steel bearings - Spindle Interface Type: FSA MegaExo - BB Shell Width: 92mm - Bottom Bracket Shell I.D.: 41 - BB/Frame Interface: BB92

The FSA Alloy Cup JIS bottom bracket is suitable for Italian threaded interfaces. - Alloy cups - Double "snap" seals for water and dirt protection - Spindle Interface Type: Square Taper JIS

Wheels Mfg BB86/92 thread together bottom bracket for use with 24mm spindle diameter cranksets. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Note: Use only bottom bracket tools compatible with 16-notch, 48.5mm outer diameter cups. - Bearings: Enduro ABEC-3 - Color: Black - Bottom Bracket/Frame Interface: BB86, BB92 - Bottom Bracket Shell Width (mm): 86mm, 92mm, 89.5mm - Bottom Bracket Shell I.D.: 41mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 106g

The EVO386 standard is designed for oversized spindles. CeramicSpeed's kit for Shimano allows you to install Shimano or FSA cranks with 24mm spindles. The cups come with CeramicSpeed Bearings installed. Both CeramicSpeed Standard and Coated Bearings are available. Both utilize super smooth CeramicSpeed Balls and hardened-steel races. The latter has an additional metallic coating on the races to further smooth and harden the steel, further increasing life and lowering drag. The design of overlapping cups extending through the shell for EVO386 reduce the likelihood of creaking and increase the reliability of the system. The CeramicSpeed Standard Bearings feature an average drag reduction of 75% compared to stock bottom brackets. That translates into frictional drag of 0.3-0.4 watts per set, which is the result of great design, hardened-steel races, and ceramic balls that are 100% smoother and 15% harder than the ceramic competition. The CeramicSpeed Coated Bearings are a step up as they reduce drag by 50% compared to our Standard Bearings and an improvement in bearing life by 60%. All Round Grease comes standard in the bearings, but can be replaced for lower drag TT and Track Grease or higher durability LongLife Grease, which adds a bit of drag but stays in the bearing when riding through messy conditions. In The Box: - 1 bottom bracket with bearings installed - 2 dust covers - 10ml syringe of All Round Grease - Sticker Sheet

The new SRAM DUB crank standard, built on a 28.99mm spindle, allows for a more contamination-resistant BB design, while retaining the ultra-efficient & long-lasting qualities CeramicSpeed Bottom Brackets are known for. With an integrated dust cover for all models, the snug & secure fit not only fully protects the face of the bearing, but also delivers exceptional performance without any sacrifices. CeramicSpeed hand-built bearings carry the load from crank to frame with unparalleled durability & efficiency. The SRAM DUB crank spindle requires the bearing contact points to be in a set and designated width, and all CeramicSpeed Bottom Bracket options perfectly match the bearing placement on the crank spindle with the required frame interface for nearly any model of bike. Without the use of unnecessary adapters or spacers, a quiet & stable platform is ensured throughout the life of the product. The BSA for SRAM DUB Road comes in two versions. The first is our low drag, long life Standard Bearing with hardened-steel races and our super-round CeramicSpeed balls. The second is our Coated Bearing, which uses those same balls installed on coated, hardened-steel races for longer life and less bearing drag. Compatible with: - Frame: BSA - Opening diameter: Threaded - Shell width: 68mm In the box: - 2 cups with CeramicSpeed Bearings installed - 2 dust covers - 4 x 1mm spacers - 10ml syringe of CeramicSpeed All Round Grease - Sticker sheet - Spacertube

BBright is the Cervelo bottom bracket standard found on most of their frames, save the P5. In order to fit Shimano and FSA cranks into this oversized shell, this bottom bracket, complete with CeramicSpeed Bearings, needs to be pressed in. The BBright bottom bracket comes with either CeramicSpeed Standard or Coated Bearings installed. Super smooth, super-round CeramicSpeed Balls contained in hardened-steel races are found on both versions. The Coated version has a metallic coating laid onto the races, making it even smoother and harder, resulting in lower drag and longer life. BBright is similar to BB30, but is wider on the non-drive side. As such, the bottom bracket for running 24mm diameter cranks from Shimano, FSA, and others, is unique. The CeramicSpeed Standard Bearings last at least three times longer than other bearings. Thanks goes to hardened-steel races and CeramicSpeed Balls that are 100% smoother and 15% harder than the ceramic competition. These have a frictional drag of 0.3-0.4 watts per set, which represents an average 75% drag reduction compared to most BBs. The CeramicSpeed Coated Bearings reduce drag by 50% compared to CeramicSpeed Standard Bearings, and show an improvement in bearing life by 60%. In The Box - 1 bottom bracket with bearings installed - 2 dust covers - 10ml syringe of All Round Grease - Sticker sheet

The Chris King ThreadFit T47 24i Bottom Bracket provides the security and reliability of a threaded bottom bracket with the stiffness and power transfer gains of a PressFit 30 bottom bracket shell. - ThreadFit T47 24i fits 86mm and 92mm shell widths with 24mm spindles - Legendary made-in-house bearings - Easily serviceable with a grease injection tool - King Lifetime Warranty - Included Fit Kit #6 is designed to mate the ThreadFit T47 24i bottom bracket with a GXP spindle - Spindle Interface Type: SRAM/Truvativ GXP - BB Shell Width (mm): 86 , 92 - Bottom Bracket Shell I.D.: 47 - BB/Frame Interface: T47

The new SRAM DUB crank standard, built on a 28.99mm spindle, allows for a more contamination-resistant BB design while retaining the ultra-efficient & long-lasting qualities CeramicSpeed Bottom Brackets are known for. With an integrated dust cover for all models, the snug & secure fit not only fully protects the face of the bearing, but also delivers exceptional performance without any sacrifices. CeramicSpeed hand-built bearings carry the load from crank to frame with unparalleled durability & efficiency. The SRAM DUB crank spindle requires the bearing contact points to be in a set and designated width, and all CeramicSpeed Bottom Bracket options perfectly match the bearing placement on the crank spindle with the required frame interface for nearly any model of bike. Without the use of unnecessary adapters or spacers, a quiet & stable platform is ensured throughout the life of the product. You have two bearing choices. The first choice is our low drag, long life Standard Bearing with hardened-steel races and our super-round CeramicSpeed balls. The second choice is our Coated Bearing, which uses those same balls installed on coated, hardened-steel races for longer life and less bearing drag. Compatible with: - Frame: BB86 - Opening diameter: 41mm - Shell width: 86.5mm In the box: - 2 CeramicSpeed Bearings - 2x dust covers - Plast-sheet - 4 x 1mm spacers - 10ml syringe of CeramicSpeed All Round Grease - Sticker Sheet

The SRAM DUB bottom bracket series has a simple job— to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility. - Gutter Seal Technology drastically improves sealing against the elements - Sealed cartridge bearings - One oversized spindle to work across every bottom bracket standard - Significantly lighter than GXP system

Get the most out of SRAM's high-tech cranksets with the GXP Team Bottom Bracket. Built to last, this super-smooth bottom bracket lets your SRAM GXP crankset (sold separately) spin effortlessly without weighing you down.

- Left and right bottom bracket cups with standard bearings for FSA MegaExo cranks - BB-9050 is for 24mm spindle 68/73mm MTB K-Force and Team Issue cranks - BB-8681 for K-Force Light (a non-ceramic option) and SLK Light Road MegaExo cranks (BB-8681 bearing covers have been redesigned so that the spindle now rides directly on the bearing itself) - BB-7000 is for 24mm spindle 68/73mm shell MTB Gravity Lite, Moto X and Afterburner cranks - BB-7000 is for 24mm spindle 83mm shell MTB Gravity Lite cranks - BB-6200 is for 24mm spindle 68mm shell Energy, Gossamer and Omega No Bolt Design cranks - BB-6000 is for 24mm spindle 68mm shell Energy, Gossamer and Omega cranks - BB-4000 is for 19mm spindle 69mm shell Omega cranks - BB-1000 is for 19mm spindle 68/73mm MTB Gamma cranks - 1.37" x 24tpi (English threads) or M36 x 24tpi (Italian threads)

- Simple and reliable square taper bottom bracket - Replaces both BB-UN26 and BB-UN55 - Sealed cartridge bearings - Cr-Mo axle - For bicycles equipped with a chain case, select BB-UN300-K - For E-type front derailleur compatibility, choose BB-UN300-E - Fixing bolts not included; Shimano FC-E6000 bolts suggested

- Double row bearings improve lifespan with enhanced durability - Allows the use of a 30mm spindle with Shimano press fit shells - Bearings races are fully coated for improved corrosion resistance - Bearings are factory filled with Phil Wood grease