Skip to main content
  • LOCAL
  • HOMEGROWN
  • EMPLOYEE-OWNED
  • GETTING MORE PEOPLE ON BIKES
  • SINCE 1922

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts

Sunlite Pedal Blocks
- Fits most platform pedals - Two wooden riser blocks w/durable rubber band - Adds 3/4" to each side (1-1/2" total)
AheadSet Universal Preload Bolt
$0.90
- Aheadset preload adjusting bolt
Bontrager Rubber Brake Cable Boot
$0.99
• Designed to keep dust and dirt out of V-Brake cable/housing systems
Bontrager Trek Nebula Seatpost Bolt
$0.99
M7 Shaft/M6 Head 48mm Long
KMC MissingLink Connector
$1.00 - $18.00
- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|
Cane Creek 1-1/8-inch Headset Shim Spacer
$1.08
Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.
Dimension Anodized Bolt M5x.8 16mm
$1.25
Dimension Anodized M5 Bolts fits most standard bottle boss and accessory mounts. - Fits most standard bottle boss and accessory mounts - Tapered socket head with 4mm broach M5 diameter bolt, 0.8mm thread pitch - 16mm thread length - Aluminium - Sold individually
Jagwire POP Brake End Caps
$1.25
POP end caps are designed specifically for use with 5mm compressionless brake housing. Not all frames or brake calipers are designed to accept a standardized end cap, so the POP end cap acts as a reducer. - Reducer end fits brake calipers and frames that are not designed for normal end caps - Durable alloy construction resists the increased stresses of compressionless brake housing
KMC Half Link Adapter
$1.50 - $2.00
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool
Hope 6mm Copper Seal Washer (Bag of 10)
$1.90
Hope Disc Brake Hose Small Parts · This washer fits on both sides of the banjo bolt and seals the hose fitting into the master cylinder
Hope Copper Washer for 5mm or Stainless Line (Bag of 10)
$1.90
Replacement copper washers for 5mm or stainless Hope hydraulic brake line.
FSA Pedal Washers
$1.99
Stainless steel pedal washers - Sold in pairs
Shimano Hoods And Road Shifter Service Parts
$2.00 - $12.00
- Hoods with (FD) are Flight-Deck compatible
Shimano M9000 Hose Cover
$2.00
This is a replacement Brake Hose Cover for the Lever End of Shimano BH90-SBM, BH90-SB levers. - Covers brake hose fitting at the brake lever
Surly Tuggnut/Snuggnut Retaining Clip
$2.00
- Replacement retaining clip for the Surly Tuggnut/Snuggnut
Hope Brass Compression Olive
$2.39
Brass compression olive for Hope hydraulic disc brakes.
Hope X2 M4 V2 Mono Moto Pad Disc Brake Pads Clip
$2.40
Hope Pad Clip • Fits Tech and Tech Evo M4, X2, and V2 Brakes
KMC 415H Connecting Link
$2.50
KMC 3/16" Master Link Chain Links - For 3/16" chain, extra wide - Extra-wide, for non-derailleur bikes: BMX, cruisers, etc - Perfectly fits on KMC 415H & 415H-NP chains
KMC 415H-OL Chain Connector
$2.50
Use to create your desired chain length in single-speed applications. Only one half link is needed. - Non-reusable - Width: 9.4 mm - Drivetrain Speeds: 1 - Color: Black - Chain Compatibility: Shimano , SRAM , Campagnolo , Connex , KMC
Odyssey Gyro G3 Detangler Upper Top Plate
$2.50
The Gyro G3 upper top plate is designed for use with the G3 detangler.
Race Face Alloy Crank Spindle Spacer
$2.50
- For Race Face 30mm Cinch System cranks only - Allows switching crank arms between bikes, such as a FatBike and an XC MTB - Use RF-2999 for 8mm to 16mm hex wrench adapter to remove spindle
Hayes Banjo Bolt
$2.87
Replacement banjo bolt for Hayes hydraulic Brake systems.
Bontrager Isozone Bar End Plug
$2.99
Bar end plugs (2)
Bontrager Madone Chainstay Rubber Gasket
$2.99
Product details - Use in chainstay pocket to seal sensor into frame
Bontrager T-Post Brake Pads
$2.99
A must-have item for all your delicate department store bike repairs.
Jagwire Basics Derailleur Cable
$2.99 - $4.00
These double ended cables have a unique disc style head that fits Simplex/Huret and a normal Shimano/SRAM head. - Galvanized - Pre-stretched - Double ended - Cable Head: Shimano/SRAM, Huret/Simplex - Defined Color: Silver - Diameter: 1.2mm - Double Ended: Yes - Disc style Huret/Simplex end is slightly smaller than original spec, but is functionally compatible with Suntour X-Press shifters
Jagwire Basics Road/MTB Brake Cable
$2.99
Basics brake cables provide value on a budget. - Pre-stretched - Double ended for compatibility with SRAM/Shimano road and mountain brakes - Color: Silver - Diameter: 1.6mm
Lizard Skins 5mm Grip Donut
$2.99
Lizard Skins grip donuts feature a neoprene material printed with the Lizard Skins logo and add comfort to the flange side of the grip.
Problem Solvers Bottom Bracket Cable Guide
$3.00
Single sided, bottom bracket mounted cable guide, with integrated cable housing stop. - Intended to fit 40mm diameter bottom bracket shells - Includes M5 mounting bolt - Direct replacement for: Salsa Vaya, Salsa Warbird (Alloy), Salsa Journeyman, All-City Cosmic Stallion, - All-City Gorilla Monsoon, All-City Macho King, All-City Space Horse Disc
Shimano Deore XT M8000 Shift Pod Cable Adjusting Unit
$3.00
Shimano Mountain Deore XT M8000 Shift Pod Cable Adjusting Unit
Page 1 of 127 Next page