- Creates up to two mounting points for Bow/Stern Tie-Downs on vehicles without easy access mounting points - Two nylon looped straps that can be mounted directly to the vehicle inside the hood
Yakima's Chain Straps are replacement bike holding straps for various models of Yakima's trunk and hitch racks. The stretchy, sturdy rubber is easy on your bike's finish and is extremely durable for long life.
- Fits all Yakima crossbars except 86-inch - Sold in sets of 4
- Fat straps are used to carry over sized (fat) tire bikes on Two/Four Timer bike racks. - Includes two straps - L 15.50" x W 1.00"
Saris' Hatch Huggers fasten Saris racks (sold separately) to certain vehicles. They replace the regular straps for vehicles with glass hinge lines and vehicles with narrow gaps around the trunk.
There's no need to shout in the car anymore! Yakima's Windjammer snaps over your front Yakima crossbar in seconds and smoothes the airflow, cutting down on roof-rack wind noise.
Kuat's Dirtbag may not be the prettiest thing out there, but it's strong, dependable, and mounts just about anywhere. Just bolt this little guy up to a solid surface, then remove your front wheel, thread in your 15mm through axle, and you're all set. This mount fits most 15 x 142mm fat bike forks.
Saris' Trap Fork Mount can be bolted anywhere you need to hold a bike. It secures your bike's fork dropouts with a stout 9-mm quick-release skewer. The Trap is made of powder-coated, light, durable aluminum. A hole in its body allows your bike to be locked with a cable (sold separately).
Yakima's Universal Locking Skewer is a great way to secure your bike to a fork-mount bike rack (sold separately) so you can leave it on the roof without worry. It works with Yakima's SKS lock cores (Same Key System; sold separately) so that you only need to keep track of one key for all your rack-security needs.
$33.00 - $50.00
Tailor your towers – these super-strong clips come in a wide range of sizes and designs so you can precisely fit your BaseLine Towers to your car’s bare roof.
$34.99 - $70.00
Yakima's vehicle-specific Landing Pads are required to mount Yakima Control Towers to your car. One end of the Landing Pad attaches to the Tower and the other end attaches to your vehicle's factory track system. They also have rubber bottoms to protect your vehicle's finish. Select the right model Landing Pad for your vehicle using the Yakima fit configurator.
Yakima's ArmLock cable lock is compatible with their DoubleDown Ace rack (sold separately). It integrates into the rack, stowing in the rack's arm when the lock is not in use. And, you simply pull it out and wrap it around the outside bike and lock it to safeguard your bikes on the rack.
$35.00 - $43.00
Yakima's vehicle-specific Q Clips are required to mount Yakima Q-Towers to your car. One end of the Q Clip attaches to the Tower and the other end attaches to your vehicle's door frame when you fasten your roof rack. Plus, they're coated to protect your vehicle's finish. Select the right model Q Clip for your vehicle using Yakima's rack configurator.
Yakima's 9-foot SKS Cable provides a visible theft deterrent for bikes and gear. It locks your load to the crossbar so you can park and leave your vehicle without worrying about your bikes.
Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 2 SKS Cores and matching keys - 2 keys included plus a control key
- Updated design, for use with all Saris racks where bikes are secured by the top tube - Bridges the gap from stem to seat tube, creating a virtual top tube - Useful on ladies and specialty frames
Free up precious cargo space and keep your vehicle's interior clean with Yakima's Wheel Fork. It securely holds one wheel and swings down when not in use. Universal snap-arounds allow the Wheel Fork to fit round and square crossbars, while its security tabs help your wheel stay in place even if your quick release loosens. And it even features a clever anti-spin device to stabilize your wheel.
This 15mm x 110 thru-axle adapter allows modern mountain bikers to quickly secure their bike on any traditional 9mm fork style bike mount. PRODUCT DETAILS - 15mm x 110mm - Axle is not included - Built in safety tabs - Durable black powder coat finish TECHNICAL SPECS - Weight: 0.70 lbs - Dimensions: L 4.50” x W 1.25” x H 4.00”
Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 4 SKS Cores and matching keys - 2 keys included plus a control key
Saris' Thelma Juvenile Retro Fit Kit allows your Saris Thelma hitch rack (sold separately) to carry kids' bikes with 20-inch wheels. The semi-circular tray holds the bike's front wheel, which is secured by a ratcheting strap. Because nothing touches the bicycle frame, the paint finish stays safe. Also, the wheel tray folds down when not in use, turning the rack into a convenient, low-profile package.
There's no need to worry when your bikes are unattended with Yakima's Lockup lock. The Lockup does double duty, locking your bike to the carrier and your hitch-mounted carrier to the car.
The RockyMounts LoBall Track is a hardcore bike rack solution for channel systems commonly found in Toyota, Nissan, Chevy, and GMC truck beds. It includes locking quick release, lock core, and two keys.
Secure your through-axle-equipped bike with RockyMounts' DriveShaft HM. This mount fits 15mm and 20mm through-axle forks, plus it is incredibly easy to load and unload. The bolt-on, do-it-yourself installation is perfect for any application; truck beds, trailers, vans, or even at home in your garage! Plus, it comes with a lock core and two keys for peace of mind.
Hit the road today with Saris’ Sentinel 2-Bike rack—it’s ready to go right out of the box, easy to mount, and securely holds two bikes. The frame adjusts to the contours of your car and folds down flat for simple storage. To protect your car and provide a solid mount, the four hold-down straps have coated hooks, while the legs are foam-padded. Stiff ratcheting straps ensure a firm grasp on your bikes.
Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 6 SKS Cores and matching keys - 2 keys included plus a control key
Besides improving your vehicle's looks, the Yakima Fairing reduces wind noise and the amount of debris that strikes your bikes. Its sleek design fits most windshield angles and curvatures and is compatible with every Yakima tower. Plus, it's easy to install and a great place for your favorite bike stickers!
- Sold in pairs-combine them with rollers or saddles for a custom set-up - Flexible saddle shape conforms to boat hull for secure full contact cradling - Felt padded cradles protect hulls and are shaped for easy loading - Tool free install to any cross bar - Locks to base with SKS lock Cores for added security (sold separately) - Premium HeavyDuty strap and bow/stern tie down included - Capacity: 1 kayak 80lbs (when used with another pair of saddles or rollers)
Fitting kit required for perfect fit of the roof rack to a specific car.
$112.00 - $199.00
No rails? No problem. The versatile BaseLine’s intelligent design and advanced adjust ability help it morph to the shape of your car’s roof for a sleek, secure, load-it-up fit. - Secure, easy-to-use tower specifically designed for cars without roof rails or gutters - Advanced tower architecture is sleek, strong and quiet - Works with JetStream, CoreBar and RoundBar crossbars - Tri-axial DropHook clip adjustment easily adjusts to a wide range of roof shapes for safe, secure hold - BarBed has 12° of pitch adjustment to optimize tower position and level bars on rounded roofs - Super-simple installation – tool included - Maximum load rating of 165lbs (75kg), depending on vehicle and bar rating - Easily locks to you vehicle with our SKS system (sold separately) - RoundBar SL Adapter required to use Yakima's classic RoundBar with - StreamLine System Towers (sold separately) - Streamline crossbars are compatible with any StreamLine Tower StreamLine Tower TECHNICAL SPECS - Dimensions: L 5.00” x W 6.00” x H 4.00”
Designed to help you easily get any type of kayak up on your roof, the HandRoll’s rubber rollers provide load assist with grip, stability, and protection. The bases pivot to automatically fit the shape of your boat, then lock tight to cradle it while traveling. The universal mount fits most roof racks – no tools needed, and heavy-duty straps and tie-downs are included to keep things secure. - Sold in pairs – combine with HandRoll or an additional DeckHand to complete the set - Large rubber rollers provide a built-in load assist to help guide your boat into place - Durable rubber pivoting rollers adjust to boat shape for secure loading - Roller pivot design automatically adjusts to boat’s shape for a secure hold - Universal mounting hardware fits most roof racks - Easy tool-free installation lets you quickly mount, load and go - Locks to roof rack with SKS Lock Cores (sold separately) - Includes Heavy-Duty Straps and Bow/Stern Tie-Downs
Page 1 of 2 Next page