Skip to main content
  • LOCAL
  • HOMEGROWN
  • EMPLOYEE-OWNED
  • GETTING MORE PEOPLE ON BIKES
  • SINCE 1922

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Tools/Maintenance

DT Swiss Spoke Freeze
$89.90
- Spoke thread treatment for DT-Swiss by Loctite - Use with light oil for a secure, re-trueable wheel or use by itself for a maximum bond
RockShox Vivid Counter Measure Tool
$89.00
Vivid/Vivid Air internal floating piston spring compressor
Park Tool Snap Ring Pliers Set
$88.95
Designed and built with the specific needs of the bike mechanic in mind. The RP-SET.2 includes five professional quality pliers for internal snap rings and one for external snap rings. Pliers are made from forged, heat treated cro-moly steel with a return spring and vinyl dipped grips. RP-1: .9mm straight internal. Opens from 22mm down to 0 (tips touching) RP-2: 1.3mm bent internal. Opens from 22mm down to 2mm (center to center) RP-3: 1.3mm bent external. Opens from 2mm (center to center) up to 18mm RP-4: 1.7mm bent internal. Opens from 21mm down to 2mm (center to center) RP-5: 1.7mm straight internal; Opens from 25mm down to 0 (tips touching)
Wheels Manufacturing Inc. Hub Bearing Installation Drift Set
$87.50
This 23-piece Wheels Mfg. drift set is used to install 10mm and larger inside diameter sealed bearings, using a press with 3/8" diameter rod - Includes open bore and over axle drifts for 6802, 6901, 6902, 6903, 6000, and 6001 bearings - 10mm ID hole, for use with Wheels Manufacturing PRESS-1 or PRESS-4 bearing press handles
Park Tool Thru-Axle Tap
$29.95 - $86.95
Frame and Fork Taps will become a lifesaver at some time for virtually every mechanic. These taps are made of high-carbon steel and are precision ground. Park Tool Frame and Fork Taps cut easily and fit conventional tap handles.
Park Tool Spoke Tension Meter
$84.99
The key to wheels that are strong and reliable is having spokes that are properly and uniformly tensioned. Park's Spoke Tension Meter accurately and reliably measures the absolute tension of each of the spokes in a wheel, as well as the relative tension between all the spokes in a wheel. It's easy to use, affordable and it works on nearly any bicycle spoke, no matter its diameter, material or shape.
Park Tool Crown Race Setting System (1, 1-1/8 -inch)
$84.95
Quickly, safely and easily set your crown race with Park's CRS-1 Crown Race Setting System. It includes 6 different inserts (3 for 1-inch and 3 for 1-1/8-inch steerer tubes) that ensure full contact with the crown race for precision installation.
Wheels Manufacturing Inc. Professional Universal Bottom Bracket Press
$83.00
Professional, shop-quality, version of the Wheels Mfg Universal Bottom Bracket Press, but with larger handles and brass inserts in the handle faces. Easy to use, this tool is made up of two machined aluminum handles, 1/2" threaded rod, and two machined aluminum drifts. Each drift is machined with multiple steps to fit common bottom bracket shell and bearing diameters listed below. No more searching for the correct size drifts and parts. Just match up the drift to your frame's BB shell size and your bottom bracket's bearing size and press. 1/2" diameter threaded rod resists bending, allowing for the cups to align and press in straight. Drifts can also be used as a frame bottom bracket shell sizing guide! - Machined aluminum handles and drifts - Brass inserts in the tool faces allow each handle to turn freely against drifts - Red anodized drifts and handles - Steps on drift are marked with diameter sizes - Zinc-plated 1/2" diameter threaded rod - Works with BB shells up to 132mm wide Fits: - BB30 (42mm) - PF30 (46mm) - BB86, BB92 (41mm) - BBRight (46mm) - BB386EVO (46mm) - Cannondale BB30A (42mm) - Cannondale PF30A (46mm) - Specialized Carbon OSBB (46mm) - Specialized Alloy OSBB (42mm) - TREK BB90, BB95 (37mm) - PF24 (41mm) - 22/24/30mm inner bearing diameters
Feedback Sports Range Torque Ratchet
$79.99
The all-new Range Torque Wrench + Ratchet Wrench Combo simplifies proper bike maintenance by combining the precision of a bar-style torque wrench and speed of 2-way ratchet wrench in a compact, lightweight and portable package. There’s no need to set a specific indexed torque, or go searching for missing bits – select your bit from the case’s labeled inserts, ratchet for quick thread engagement and use the torque head to match manufacturer specifications for torque. - Ratchet wrench for speed; torque wrench for precision - Portable and light – fits in a ride pack or travel-transport - Infinite torque capabilities within the 2-10Nm range - 2-way ratchet wrench protects the integrity of torque wrench function - 6-degree ratchet engagement maneuvers in tight spaces - Torque validation for “bolt-checks” on any bicycle components - Compact head and bit design allows clearance and full function in tight spaces - 14 labeled S2 Steel* allen key, torx bit, and Phillips head bits covering the most common bicycle applications - #2 Philips; Torx: T10 , T20, T25, T30; Hex: 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm; - Extended length: 5mm Hex & T25 Torx - User ‘zero’ ensures accuracy of the torque bar for every use - 3rd-party tested and validated for accuracy and longevity (exceeds ISO standard) *S2 Steel is industry-leading tool steel for precision edges and durability
Lezyne Port-A-Shop S
$79.99
Small, cycling specific tool kit designed for traveling. Kit includes tools for basic maintenance. Convenient, canvas padded carrying case with zipper closure. Labeled pockets keep tools organized and safe during transport. Tools Included: - T Block - Multi Block - Allen Block - Chain Drive - Power Levers
Topeak Nano TorqBar DX
$79.99
The Nano TorqBar DX set includes 4 / 5 / 6Nm TorqBits and is the slimmest and most compact preset torque wrench available. It is a precision-crafted, high quality tool for either the home mechanic, professional bike shop, or your own jersey pocket. Its advanced torque limit release design consistently applies precise torque values on component bolts for safety and prevents damage to expensive carbon parts. Also includes the 5 most popular tool bits, 3 / 4 / 5 mm hex & T20 / T25 Torx. Two of your favorite bits can be carried in the handle of the Nano TorqBar for immediate use and even greater portability during rides. - Added Features: Integrated compartment for two bits, Carry case - Body: Aluminum / Engineering grade plastic - Allen Bits: 3/4/5 mm - Functions: 15 - Torque Value: 4/5/6 Nm - Tool Material: Hardened steel - Torx Bits: T20 / T25 - Weight: 62 g / 2.19 oz (Tool w/ 1 TorqBit & 2 bits) - Size: 12 x 1.6 x 1.6 cm / 4.7” x 0.6” x 0.6”
Park Tool Home Mechanic Bearing Cup Press
$79.95
Simple and economical, Park's Home Mechanic Bearing Cup Press is the perfect addition to your toolbox. With a few quick twists it easily installs all sizes of headset cups and one-piece bottom bracket cups.
Park Tool Metric Wrench Set
$79.95
Never be left looking for an errant wrench when you have Park's Metric Wrench Set. It includes 12 high quality Park metric wrenches from 6 to 17mm in diameter, featuring both box and open ends. They are all forged from chrome vanadium steel, then chrome plated for durability and dipped in Park Tool blue vinyl for outstanding comfort and ease of use.
Topeak Ratchet Rocket Lite NTX+
$79.95
The Topeak Ratchet Rocket Lite NTX+ has everything you need to fix and make precise adjustments to your bike while on the road. Featuring a fine-tooth ratchet mechanism with reverse lever and thumb wheel with adjustable torque TorqBit for ease and accuracy in tight spots. Includes magnetic bit holder, hardened steel tools in 2, 2.5, 3, 4, 5, 6 and 8mm hex, T10, T15, T25 Torx, #2 Phillips bits and CrMo steel chain tool. The protective case keeps things organized and secure, and even has a pocket to carry glueless patches. - Functions: 19 - Ratchet tool material: Chrome vanadium steel - Bag: Nylon - Added features: Screwdriver, Secondary chain link fence, Chain pin breaker, Leverage added, Patch pocket, Magnetic bit holder - Size: 13 x 6.5 x 3.3cm - Weight: 240 g / 8.46-oz Tools: - Adjustable torque TorqBit : 2 - 6Nm - Allen bits - 2 / 2.5 / 3 / 4 / 5 / 6 / 8mm - Torx bits - T10 / T15 / T25 - #2 Phillips screw driver, CrMo steel chain tool*, Ratchet tool * The chain tool is compatible with single and multi-speed chains up to 12 speed, NOT including Campagnolo hollow pin chains.
Park Tool Centering Gauge
$77.95
Park Tool's Centering Gauge represents a dished rear wheel to assist in centering the TS-2.2 or TS-2 truing stands (each sold separately).
SRAM Disc Brake Bleed Kit with Hydraulic Fluid
$77.00
SRAM's Disc Brake Bleed Kit has everything you need to ensure your brakes are dialed. The kit is compatible with SRAM X0, XX, Guide, and HydroR brakes. It is not compatible with RockShox' fork bleed kit. Includes the following: • 2 syringes/fittings • bleed blocks • Torx tool • Crow's foot • Bleeding Edge Fitting • DOT 5.1 hydraulic fluid
Park Tool P-Handle Hex Wrench Set
$76.95
Engineered for fit, function, and leverage, these L-shaped shop-quality hex wrenches are a must have for every workshop. - High-torque, industrial steel wrenches - Straight hex shaft on the short side, ball end on the long side - Includes 2, 2.5, 3, 4, 5, 6, 8, and 10mm - Comfortable, ergonomically designed nylon handles fit perfectly in your hand - Durable wall/pegboard mount tool holder allows easy access and organization
Magura Pro Bleeder Tool Kit
$75.00
- Kit includes full-fluid capture bottle, bleed fittings, hose, syringe and 16oz Magura fluid
Pedro's Pro T/L Handle Hex & Torx Set w/Pouch
$75.00
- Made from heat-treated S2 tool steel to ensure the ultimate in strength and lasting performance - Ergonomic, soft-plastic, TPR handle for comfort, leverage, and easy handling - Includes: 2, 2.5, 3, 4, 5, 6, & 8mm hex and T10, T25, & T30 torx in storage pouch Pedro's Pro T/L wrenches have become a favorite of mechanics around the world. The updated set, housed in a custom storage pouch, includes hex and torx sizes used day in and day out; 2, 2.5, 3, 4, 5, 6, and 8mm hex wrenches, and T10, T25, and T30 torx wrenches. Each wrench is crafted from premium S2 tool steel to ensure the ultimate in strength and lasting performance. Extra length on each leg of the wrench offers better leverage and easy access to hard-to-reach bolts. Each end of the wrench is purpose-built, with a versatile ball-style end on the long leg and a short leg covered with an ergonomic, soft plastic, over-molded TPR handle that fits in your hand like a glove to provide enhanced grip and comfort.
Wheels Manufacturing Inc. Universal Bottom Bracket Press
$75.00
This do-it-all universal bottom bracket press is designed to press in all current Wheels Mfg. bottom brackets. Economical and easy to use, this tool is made up of two machined aluminum handles, a 1/2-inch threaded rod, and two machined aluminum drifts. Each drift is machined with multiple steps to fit common bottom bracket shell and bearing diameters. No more searching for the correct size drifts and parts—just match up the drift to your frame's BB shell size and your bottom bracket's bearing size, and press away. - Zinc-plated 1/2-inch diameter threaded rod resists bending, allowing for the cups to align and press in straight - Drifts can also can be used as a frame bottom bracket shell sizing guide - Machined aluminum handles and drifts - Red anodized drifts and handles - Steps on drift are marked with diameter sizes - Works with BB shells up to 132mm wide - Includes two universal BB drifts
Wheelsmith Spoke Sizing Tools
$75.00
- Professional tools to correctly size spokes for wheelbuilding
Park Tool Shop Cone Wrench Set
$74.95
Park Shop Cone Wrenches are made of thin tool steel to fit the low-clearance adjusting nuts and cone flats on hubs and other bearing assemblies. Their special Y-heads put more material where it's needed for greater strength. Most applications require several cone wrenches, so Park gives you a whole set, featuring 13mm - 24mm, 26mm and 28mm wrenches to suit your repair needs.
Park Tool P-Handle Torx Compatible Wrench Set
$73.95
Engineered for fit, function, and leverage, these L-shaped shop-quality Torx compatible wrenches are a must have for every workshop. - High-torque, industrial steel wrenches - Torx compatible drivers at each end - Includes T6, T8, T10, T15, T20, T25, T30, and T40 - Comfortable, ergonomically designed nylon handles fit perfectly in your hand - Durable wall/pegboard mount tool holder allows easy access and organization
Jagwire Pro DOT Bleed Kit
$71.99
Jagwire's Pro DOT Bleed Kit comes with the right fittings to bleed Avid, Formula, Hayes and Hope hydraulic-disc brakes for optimum braking performance. You can buy it with or without Finish Line DOT brake fluid.
Wheels Manufacturing Inc. PRESS-1 Handle & Rod Assembly
$70.00
Replacement handle assembly for Wheels Mfg. large sealed bearing press (PRESS-1). Primarily designed for pressing bearings into hubs. Note: rod diameter is smaller than the hole size in Wheels Mfg. universal bottom bracket drift. Includes: - Machined fixed end aluminum "T" handle with brass insert - Machined non-fixed end aluminum "T" handle with brass insert - 3/8" x 12TPI threaded rod - M5x12mm flat head screw to secure fixed-end handle to rod
Finish Line Ecotech Degreaser
$9.99 - $69.99
- A biodegradable degreaser that cuts through the toughest grime - Strong enough for the metal parts, Yet safe enough to clean parts with rubber o-rings and seals, urethane elastomers, and painted surfaces - Exceeds all federal V.O.C. and California carbon regulations - Law prohibits ORM-D materials from shipping by air
Topeak Alien III
$69.95
When a mechanical problem has you feeling lost in space, the Alien III is the extraterrestrial that will ensure you don't have to phone home. Its molded-plastic body provides an excellent gripping surface and splits in two with a press of a button. Tools include: 2, 2.5, 3, 4, 5, 6, 8 and 10mm Allen wrenches; 8, 9, 10mm box wrenches; Phillips and regular screwdrivers; a universal chain tool with chain hook; 14-, 15-gauge, Shimano and Mavic spoke wrenches; a stainless-steel knife; a T25 Torx wrench for disc brakes; a tire lever and a compartment for 2 chain pins. There's even a handy bottle opener for after the ride.
Campagnolo EPS Connector Tool
$69.90
- Specific tool designed for connecting and disconnecting EPS cables
Jagwire Pro Mineral Oil Bleed Kit
$67.99
Jagwire's Pro Mineral Oil Bleed Kit has everything you need to bleed Giant, Magura, Shimano and Tektro brakes plus a bottle of Finish Line mineral oil, too (image of Finish Line mineral oil unavailable from manufacturer).
Park Tool Internal Cable Routing Kit
$65.95
Take the guesswork out of installing cables, wires and housing inside the frame. The IR-1.2 speeds the internal frame routing of electric wires, shift cable/housing, brake cable/housing and hydraulic tubing on carbon fiber, titanium, and aluminum frames. Kit includes four plastic-coated 250cm cables with attached magnets and unique fittings plus an external guide magnet to speed operation. Newly updated to include a dedicated E-tube Di2 cable connector that easily pulls through a 6mm frame hole. Opposite polarity magnets on cables seek and attach inside frame tubes, making it easy to route through frame entrances and exits. Works with any size frame including tandems. A true time and frustration saver!