Tools/Maintenance

Our 2437 open bore adapter is used to press 24x37 sealed bearings into bottom bracket cups, and direct fit frames like trek BB90. The adapter is machined with one step at 24mm ID, which fits into the center of the sealed bearing. - Installs: 24x37 bearing - Inner step outer diameter: 23. 8mm - Outer diameter: 36. 8mm - Thru hole diameter: 0. 387" (9. 8mm) - Inner hole sized to fit 1/2" threaded rod - Compatible with BP0006, BP0007 - Machined, red anodized aluminum - Sold individually (2 drifts required for some installations)

Our 6806 open bore adapter is used to press 42x30 sealed bearings. The adapter is machined with one step at 30mm ID, which fits into the center of the sealed bearing. Common bearing size for BB30 frames and bottom brackets. - Installs: 6806 bearing - Inner step outer diameter: 29. 9mm - Outer diameter: 41. 8mm - Thickness: 7mm - Thru hole diameter: 0. 387" (9. 8mm) - Inner hole sized to fit 1/2" threaded rod - Compatible BP0006, BP0007 - Machined, red anodized aluminum - Sold individually (2 drifts required for some installations)

Our GXP-LEFT open bore adapter is used to press 22x37 sealed bearings into SRAM GXP bottom bracket cups and direct fit frames like trek BB90. The adapter is machined with one step at 22mm OD, which fits into the center of the sealed bearing. - Installs: 22x37 (GXP) bearing - Inner step outer diameter: 21. 9mm - Outer diameter: 36. 8mm - Thickness: 7mm - Thru hole diameter: 0. 387" (9. 8mm) - Inner hole sized to fit 1/2" ACME threaded rod - Compatible with BP0006, BP0007 - Machined, red anodized aluminum - Sold individually

Wheels Manufacturing open bore adapters are used to press sealed cartridge bearings into place. The adapters are machined with one step to correspond to the bearing OD, which fits in to the center of the sealed bearing and an outside diameter to accommodate the bearing's outer diameter. Size: [Bearing inner diameter] x [Bearing outer diameter] Note: If only one dimension is given, that is the outer diameter of the adapter, with no inner diameter step

Precision-machined anodized aluminum designed to allow for easy adjustment of the Fox DHX2/FLOAT X2 shocks requiring a 3mm and 6mm hex wrench. This small, pocket-sized tool allows for easy trail-side adjustments.

Another must-have tool for the busy bike shop. Wheels Mfg. machined aluminum Speed Spacers take up extra space on your bearing press so you don't need to spin the handles as far to tighten things up. They also work in axle configurations where you need to press in a bearing over an axle. - Machined Aluminum - Anodized Red - Sold individually Compatible with: - PRESS-4 - Economy Press - PRESS-1 - Large Sealed Bearing Press - PRESS-1-HNASSY - Handle & Rod Assembly

Designed to press in all current wheels mfg bottom brackets! our universal bottom bracket frame drift is designed to press all current wheels mfg bottom bracket cups in to your frame. The adapter is machined with multiple steps to fit common bottom bracket shell inside diameters listed in the compatibility tab below. Each step is laser etched with the diameter size. Drift can also can be used as a frame bottom bracket shell sizing guide! - Inner hole sized to fit 1/2" threaded rod. (Not for use with our Press-1 or Press-4 ) - Compatible with any other press with a 1/2" diameter rod - Recommended for use with Wheels Mfg BP0006, BP0007 - Machined aluminum - Anodized red - Sold individually We do not recommend it for use with press with a rod diameter less than 1/2". When used with a smaller rod, it is almost impossible to prevent the cups or bearings from pressing in straight.

The Wheels Manufacturing universal bottom bracket drift presses all current Wheels Mfg bottom bracket cups into your frame or bearing cups. The adapter is machined with multiple steps to fit common bottom bracket shell and bearing diameters listed below. Each step is laser etched with the diameter size. - Inner hole sized to fit 1/2" threaded rod. Not for use with Wheels Mfg PRESS-1 or PRESS-4 - Compatible with any other press with a 1/2" diameter rod - Recommended for use with Wheels Mfg Universal BB Press - Machined aluminum - Anodized Red - Sold individually - Drift can also be used as a frame bottom bracket shell sizing guide! Fits the following bottom bracket shell sizes: - BB30 (42mm) - PF30 (46mm) - BB86, BB92 (41mm) - BBRight (46mm) - BB386EVO (46mm) - Cannondale BB30A (42mm) - Cannondale PF30A (46mm) - Specialized Carbon OSBB (46mm) - Specialized Alloy OSBB (42mm) - TREK BB90, BB95 (37mm) - PF24 (41mm)

Precision-machined anodized aluminum tool designed to allow for easy installation, removal, or adjustments of the Shimano Hollowtech II Crankset compression bolt.

Sealed bearing extractor for 29mm ID bearings. Extractor has 1/2" thru hole for use with our 1/2" threaded rod press handles. - This extractor is part of a system that requires additional pieces to function.

- Machined to match manufacturer specifications and designed to be used with a ½” drive socket or torque wrench for easy installation and removal of e-bike lockrings. - Precision machined aluminum body. - Anodized in Wheels MFG red.

- Machined to match manufacturer specifications and designed to be used with a ½” drive socket or torque wrench for easy installation and removal of e-bike lockrings. - Precision machined aluminum body. - Anodized in Wheels MFG red.

- Machined to match manufacturer specifications and designed to be used with a ½” drive socket or torque wrench for easy installation and removal of e-bike lockrings. - Precision machined aluminum body. - Anodized in Wheels MFG red.

This Wheels Mfg. Double End Bottom Bracket wrench fits 16-notch bearing cups with an outside diameter of 44mm as well as 16-notch bearing cups with an outside diameter of 48.5mm. - Machined aluminum - Anodized red. - Compatible with all current Wheels Mfg bottom brackets with notched cups

- E-bike socket designed for installing and removing compatible cassettes on Bafang hub-drive motors without removing motor wiring - Center clearance for E-Bike wiring is 0.812". 12-spline 23mm OD tool fittings - Made in the USA

- These sockets have a machined 3/8" drive, which can be used to allow 3/8" drive torque wrenches to be attached and locks onto 1/2 inch UNC press rod for secure and easy installation of thin flanged bottom brackets - Machined 6061 aluminum in anodized red - Made in the USA

- These sockets have a machined 3/8" drive, which can be used to allow 3/8" drive torque wrenches to be attached and locks onto 1/2 inch UNC press rod for secure and easy installation of thin flanged bottom brackets - Machined 6061 aluminum in anodized red - Made in the USA

Thin flange bottom bracket socket designed to create a tight grip on thin flange bottom bracket to avoid slipping while torquing cups into bike frames. This single-sided socket is used for installing and removing 48.5mm, 16-notch bottom bracket cups. The socket has a machined 3/8" drive, which can be used to allow 3/8" drive torque wrenches to be attached and locks onto 1/2 inch unc press rod for secure and easy installation of thin flanged bottom brackets. Machined 6061 aluminum anodized red

- Machined to match manufacturer specifications and designed to be used with a ½” drive socket or torque wrench for easy installation and removal of e-bike lockrings. - Precision machined aluminum body. - Anodized in Wheels MFG red.

BB30 service kit for SRAM DUB cranks. - Includes (2) Enduro 6806/29 ABEC-3 sealed bearings and 2 retaining clips - Bearing Dimensions: OD: 42mm / ID: 29mm / Width: 7mm - Enduro ABEC-3 bearings - Use with SRAM DUB cranks Note: SRAM DUB cranksets are not designed to work in 68mm or 73mm wide shells with inboard bearings. Use only if your frame is a direct-fit bearing system, and the BB shell width is 86.5mm or wider.

- Headset drift for sealed bearing installation press - Drift is machined with steps to press in headset cups that use either 1-1/8" or 1-1/2" bearings, but may be used for other cups with odd-sized sealed bearings - Compatible with bearing presses using 1/2" diameter rod, such as Wheels Mfg Headset Cup Press (PRESS-8)

Headset drift for sealed bearing installation press. - Drift is machined with multiple steps to fit common head tube inner diameters - Compatible with bearing presses using 1/2" diameter rod, such as the Wheels Mfg. Headset Cup Press (PRESS-8) - Fits the following headtube inner diameters: 34mm, 44mm, 49mm, and 56mm

- Similar to its big brother but at a fraction of the size. The new and more efficient Adjustable Press Stop Mini will make life easier for mechanics as it allows for quick and accurate positioning in places where space is tight at the press of a button. - Adjustable Press Stop slides along 3/8" ACME threaded press rod when the button is depressed and can be placed quickly to secure drifts, spacers, and cups when completing maintenance or installation of bike headsets, bottom brackets, and bearings. - Compatible with new and existing Wheels MFG press kits which utilize a 3/8" ACME threaded rod - Compatible kits include: Press-4, ST0006, Press-1 - Machined aluminum body - Anodized in Wheels MFG red. - Durable steel button - For use with 3/8" ACME threaded press rod (Sold Separately)

- Allows for quick and accurate positioning at the press of a button - Slides along 1/2" UNC threaded press rod when the button is depressed and can be placed quickly to secure drifts, spacers, and cups when completing maintenance or installation of bike headsets, bottom brackets, and bearings

The dropout saver system is an alternative to replacing badly bent or damaged derailleur dropouts. Rather than replacing the damaged dropout completely, simply drill out the damaged threads, install a dropout saver, and realign the dropout. Kit includes: - (1) 15/32-inch reduced shank drill bit - (2) DS-1 wide dropout savers     - (3) DS-2 narrow dropout savers    

- Essential bearing press for installation of bearings with a 10mm minimum ID - (1) 3/8 ACME threaded rod, (2) 30mm standoffs, (2) threaded handles

Shock Bushing Press Kit An evolution of our original bushing toolset which required the use of a hammer to pound out shock bushings. The new design uses our threaded handle press system to easily and efficiently remove shock bushing in 12mm and 1/2 inch sizes. - Fits 12mm and 1/2" bushings. - Machined aluminum - Anodized Red

- Bottom bracket and bearing installation kit - (1) 1/2" rod, (2) threaded handles - (1) 2237 OPEN BORE, (2) 2437 OPEN BORE, (2) 29mm OPEN BORE, (2) 6806 OPEN BORE, (1) FRAME DRIFT

- Essential bottom bracket bearing extractor set - (1) 6806 extractor, (1) 24x37 extractor, (1) 29 DUB extractor, (1) 22mm GXP extractor

Another indispensable tool for the professional bike shop. The hub bearing press pro kit works with bearings that have an i. D. Of 10mm or smaller (most front hub sealed bearing fall in this range). Installs sealed bearing sizes : - 6801 - 6802 - 6803 - 6900 - 6901 - R6 - 688 - 608 - 609 All parts are laser etched for easy identification. Formally press-2 includes: - 608 open bore 5mm x 2 - 608 over axel 5mm x 2 - 609 open bore 5mm x 2 - 609 over axel 5mm x 2 - 688 open bore 5mm x 2 - 688 over axel 5mm x 2 - 6801 open bore 5mm x 2 - 6801 over axel 5mm x 2 - 6802 open bore 5mm x 2 - 6802 over axel 5mm x 2 - 6803 open bore 5mm x 2 - 6803 over axel 5mm x 2 - 6900 open bore 5mm x 2 - 6900 over axel 5mm x 2 - 6901 open bore 5mm x 2 - 6901 over axel 5mm x 2 - R6 over axel 5mm x 2 - Rear QR skewer All parts are laser etched for easy identification.